Engine Control Module - Remove and Install
- Loosen screw (1) until wiring harness (4) can be disconnected. Disconnect wiring harness (4) from engine control module (2).
- Remove four bolts (3). Remove the engine control module from the engine.
Show/hide table
| |
| Illustration 1 | g00609591 |
- Position engine control module (2) on the engine and install four bolts (3).
- Connect wiring harness (4) to engine control module (2). Tighten screw (1) to a torque of
6 ± 1 N·m (53 ± 9 lb in) .
Show/hide table
|
| |
| Illustration 2 | g00609591 |
Caterpillar Information System:
G3612 and G3616 Engines Engine Oil Pan - Assemble
G3612 and G3616 Engines Engine Oil Pan - Disassemble
3126B and 3126E On-highway Engines Alternator - Remove and Install
G3612 and G3616 Engines Engine Oil Pan - Install
3406E and 3456 Engines for Caterpillar Built Machines Pinion Clearance - Adjust
C-9 Engines for Caterpillar Built Machines Engine Design
G3612 and G3616 Engines Engine Oil Pan - Remove
3126B Truck Engine Electronic Control System Components
Installation of the 161-0797 Governor Control (Load Share Module) as Service Replacement for the 131-5459 Governor Control (Load Share Module) {4490} Installation of the 161-0797 Governor Control (Load Share Module) as Service Replacement for the 131-5459 Governor Control (Load Share Module) {4490}
3406E and 3456 Engines for Caterpillar Built Machines Solenoid Valve (Compression Brake) - Test
3406E and 3456 Engines for Caterpillar Built Machines Control Valve (Compression Brake) - Test
3406E Generator Set Engines Annunciator Panel - Inspect
G3612 and G3616 Engines Oil Temperature Regulators - Remove and Install
3612 and 3616 Engines Aftercooler - Remove - High Performance Aftercooler
3126B and 3126E On-highway Engines Fan Drive - Remove
G3612 and G3616 Engines Priority Valve - Remove
3126B and 3126E On-highway Engines Fan Drive - Install
3126B and 3126E On-highway Engines Air Compressor - Remove and Install
G3612 and G3616 Engines Priority Valve - Install
G3612 and G3616 Engines Priority Valve - Disassemble
G3612 and G3616 Engines Priority Valve - Assemble
G3612 and G3616 Engines Vibration Damper - Remove
3126B and 3126E On-highway Engines Air Compressor Drive Gear - Remove and Install
3126 Truck Engine Military Air Compressor Drive Gear - Install