Air Compressor Drive Gear - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 132-5451     | 固定夹具     | 1     |
开始:
- 拆卸空气压缩机。 请参阅拆解和组装, "空气压缩机 - 拆卸和安装"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 在主动齿轮 (2) 上安装工具 (A) 。
Show/hide table
图 1 | g01104318 |
- 拆下螺母 (1) 和主动齿轮 (2) 。
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 132-5451     | 固定夹具     | 1     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将主动齿轮 (2) 安置在空气压缩机上。
Show/hide table
图 2 | g01104318 |
- 在主动齿轮 (2) 上安装工具 (A) 。
- 安装螺母 (1) 。 将螺母拧紧至扭矩 170 ± 15 N·m (125 ± 10 lb ft)。
End By: 安装空气压缩机。 请参阅 拆解和组装, "空气压缩机 - 拆卸和安装"。
Caterpillar Information System:
G3612 and G3616 Engines Vibration Damper - Remove
G3612 and G3616 Engines Priority Valve - Assemble
G3612 and G3616 Engines Priority Valve - Disassemble
G3612 and G3616 Engines Priority Valve - Install
3126B and 3126E On-highway Engines Air Compressor - Remove and Install
3126B and 3126E On-highway Engines Fan Drive - Install
G3612 and G3616 Engines Priority Valve - Remove
3126B and 3126E On-highway Engines Fan Drive - Remove
3612 and 3616 Engines Aftercooler - Remove - High Performance Aftercooler
G3612 and G3616 Engines Oil Temperature Regulators - Remove and Install
3126B and 3126E On-highway Engines Engine Control Module - Remove and Install
G3612 and G3616 Engines Engine Oil Pan - Assemble
3126 Truck Engine Military Air Compressor Drive Gear - Install
SR4B Generators Generator Operation
3126B Engines for Caterpillar Built Machines Crankshaft - Remove
G3612 and G3616 Engines Vibration Damper - Install
3126B Engines for Caterpillar Built Machines Crankshaft - Install
G3612 and G3616 Engines Vibration Damper - Remove
C-9 Engines for Caterpillar Built Machines Valve Mechanism Cover
G3612 and G3616 Engines Vibration Damper - Install
3126B Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
3406E Truck Engines BrakeSaver Troubleshooting
3126B and 3126E On-highway Engines Crankshaft Main Bearings - Install
G3612 and G3616 Engines Vibration Damper - Disassemble