Vibration Damper - Remove
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件说明 | 数量 |
A | 8T-0914 | 飞轮导销 | 2 |
B | 138-7573 | 连杆支架 | 2 |
开始:
- 卸下减振器护罩总成。
注: 此拆卸步骤用于安装了辅机组的减振器。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 使用配备外伸动臂的
2250 kg (5000 lb) 吊车。 确保将外伸动臂恰当地锚固至吊车上。 - 使用套筒 (1) 引导减振器的拆卸。
Show/hide table
图 2 g00610082 此图为单个减振器的图示。 - 卸下固定减振器 (2) 的两个螺栓,然后安装工具 (A)。
- 使用吊车将套筒 (1) 移至减振器中心的合适位置。
- 卸下固定减振器的其余螺栓。
- 将工具 (B) 安装在减振器上。 将吊车上的链条固定至工具 (B),以便将减振器和套筒 (1) 固定在吊车动臂上。
- 小心地将减振器从导销上移开。 小心地调动减振器,将减振器从辅机组上移开。
Show/hide table
图 3 g00610083 - 从吊车上卸下减振器 (2)。 窄型减振器的重量约为
288 kg (639 lb) 。 宽型减振器的重量约为402 kg (882 lb) 。 - 从曲轴前部卸下垫片。
注: 如果安装了辅机组,但无法操作向上起吊,那么可参照下面的步骤卸下减振器。 发动机的配置条件必须允许可以从发动机前部卸下减振器。
Show/hide table
图 1 | g00610080 |
Caterpillar Information System:
3126B Engines for Caterpillar Built Machines Crankshaft - Install
G3612 and G3616 Engines Vibration Damper - Install
3126B Engines for Caterpillar Built Machines Crankshaft - Remove
SR4B Generators Generator Operation
3126 Truck Engine Military Air Compressor Drive Gear - Install
3126B and 3126E On-highway Engines Air Compressor Drive Gear - Remove and Install
G3612 and G3616 Engines Vibration Damper - Remove
G3612 and G3616 Engines Priority Valve - Assemble
G3612 and G3616 Engines Priority Valve - Disassemble
G3612 and G3616 Engines Priority Valve - Install
3126B and 3126E On-highway Engines Air Compressor - Remove and Install
3126B and 3126E On-highway Engines Fan Drive - Install
C-9 Engines for Caterpillar Built Machines Valve Mechanism Cover
G3612 and G3616 Engines Vibration Damper - Install
3126B Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
3406E Truck Engines BrakeSaver Troubleshooting
3126B and 3126E On-highway Engines Crankshaft Main Bearings - Install
G3612 and G3616 Engines Vibration Damper - Disassemble
3114, 3116, and 3126 Engines for Caterpillar Built Machines Piston Cooling Jets - Remove and Install
3406E Truck Engine BrakeSaver Pull-Down RPM Check
3406E Truck Engine BrakeSaver Klunk Check (Free Movement of the Valve Spool)
3406E Truck Engine BrakeSaver Troubleshooting Problem List
3034 Industrial Engine Engine Description
C-9 Engines for Caterpillar Built Machines Gear Group (Front)