Priority Valve - Install
Show/hide table
| 注意 |
|---|
|
在检查、保养、测试、调整及维修产品时，请小心确保盛接油液。 在打开任何舱室或拆卸任何含有油液的部件前，请准备好盛接液体用的适当容器。 |
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
Show/hide table
 |
|
当发动机变热时，不要拆下优先阀。 热油能造成烫伤。 |
- 更换前壳体上的 O 形密封圈 (8)。
Show/hide table
图 2 g00609676 Show/hide table
图 3 g00609681 此图为管路及管道未覆盖的优先阀的图示。 - 更换前壳体上的优先阀。
- 更换六个螺栓 (7)。
- 更换箍紧螺栓 (4)。
- 更换螺栓，以便连接管 (7)。
- 更换优先阀上的管 (1)。
- 更换箍紧螺栓 (2)。
- 向下拉弯头组件，以便为更换的优先阀留出间隙。 安装前先润滑密封件。
- 连接弯头 (3)。
- 连接管 (5)。
- 关闭机油滤清器上的排放阀。
- 检查发动机机油油位。 请参阅操作和维护手册。
Show/hide table
| |
| 图 1 | g00609688 |
Caterpillar Information System:
3126B and 3126E On-highway Engines Air Compressor - Remove and Install
3126B and 3126E On-highway Engines Fan Drive - Install
G3612 and G3616 Engines Priority Valve - Remove
3126B and 3126E On-highway Engines Fan Drive - Remove
3612 and 3616 Engines Aftercooler - Remove - High Performance Aftercooler
G3612 and G3616 Engines Oil Temperature Regulators - Remove and Install
3126B and 3126E On-highway Engines Engine Control Module - Remove and Install
G3612 and G3616 Engines Engine Oil Pan - Assemble
G3612 and G3616 Engines Engine Oil Pan - Disassemble
3126B and 3126E On-highway Engines Alternator - Remove and Install
G3612 and G3616 Engines Engine Oil Pan - Install
3406E and 3456 Engines for Caterpillar Built Machines Pinion Clearance - Adjust
G3612 and G3616 Engines Priority Valve - Disassemble
G3612 and G3616 Engines Priority Valve - Assemble
G3612 and G3616 Engines Vibration Damper - Remove
3126B and 3126E On-highway Engines Air Compressor Drive Gear - Remove and Install
3126 Truck Engine Military Air Compressor Drive Gear - Install
SR4B Generators Generator Operation
3126B Engines for Caterpillar Built Machines Crankshaft - Remove
G3612 and G3616 Engines Vibration Damper - Install
3126B Engines for Caterpillar Built Machines Crankshaft - Install
G3612 and G3616 Engines Vibration Damper - Remove
C-9 Engines for Caterpillar Built Machines Valve Mechanism Cover
G3612 and G3616 Engines Vibration Damper - Install