Alternator - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 168-0383     | 断路器杆     | 1     |
- 使用工具 (A) 释放皮带张紧器 (5) 上的张力。
Show/hide table
图 1 | g00609523 |
典型示例 |
注: 如果发动机没有配备皮带张紧器,释放皮带张紧器处皮带的张力。
- 从交流发电机 (3) 的驱动皮带轮上拆卸驱动皮带 (4) 。
- 在连接至交流发电机的线束组件 (1) 的导线上做指示标记。 从交流发电机上断开线束组件 (1) 。
- 拆下螺栓 (2) 。
- 从安装支架上拆下交流发电机 (3) 。
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 168-0383     | 断路器杆     | 1     |
- 将交流发电机 (3) 安置在安装支架上。 安装螺栓 (2) 。
Show/hide table
图 2 | g00609523 |
典型实例 |
- 使用工具 (A) 将驱动皮带 (4) 安装在交流发电机的驱动皮带轮上。
注: 如果发动机没有配备皮带张紧器,调整驱动皮带的张力。 请参阅操作和保养手册,了解正确的调整步骤。
- 将线束组件 (1) 连接到交流发电机上。 使用指示标记正确连接线束组件。 将接地导线的安装螺栓拧紧至扭矩 6.2 ± 0.6 N·m (54 ± 5 lb in)。 将蓄电池导线的安装螺栓拧紧至扭矩 11.3 ± 2.3 N·m (100 ± 20 lb in)。
Caterpillar Information System:
G3612 and G3616 Engines Engine Oil Pan - Install
3406E and 3456 Engines for Caterpillar Built Machines Pinion Clearance - Adjust
C-9 Engines for Caterpillar Built Machines Engine Design
G3612 and G3616 Engines Engine Oil Pan - Remove
3126B Truck Engine Electronic Control System Components
Installation of the 161-0797 Governor Control (Load Share Module) as Service Replacement for the 131-5459 Governor Control (Load Share Module) {4490} Installation of the 161-0797 Governor Control (Load Share Module) as Service Replacement for the 131-5459 Governor Control (Load Share Module) {4490}
3406E and 3456 Engines for Caterpillar Built Machines Solenoid Valve (Compression Brake) - Test
3406E and 3456 Engines for Caterpillar Built Machines Control Valve (Compression Brake) - Test
3406E Generator Set Engines Annunciator Panel - Inspect
G3612 and G3616 Engines Engine Oil Filter Housings - Assemble
C15 Petroleum Generator Set Engines Piston Ring Groove - Inspect
G3612 and G3616 Engines Engine Oil Filter Housings - Disassemble
G3612 and G3616 Engines Engine Oil Pan - Disassemble
G3612 and G3616 Engines Engine Oil Pan - Assemble
3126B and 3126E On-highway Engines Engine Control Module - Remove and Install
G3612 and G3616 Engines Oil Temperature Regulators - Remove and Install
3612 and 3616 Engines Aftercooler - Remove - High Performance Aftercooler
3126B and 3126E On-highway Engines Fan Drive - Remove
G3612 and G3616 Engines Priority Valve - Remove
3126B and 3126E On-highway Engines Fan Drive - Install
3126B and 3126E On-highway Engines Air Compressor - Remove and Install
G3612 and G3616 Engines Priority Valve - Install
G3612 and G3616 Engines Priority Valve - Disassemble
G3612 and G3616 Engines Priority Valve - Assemble