Engine Design
Show/hide table
图 1 | g01101255 |
气缸和气门位置 (A) 排气门 (B) 进气门 |
孔径 ... 112.0 mm (4.41 in)
行程 ... 149.0 mm (5.87 in)
排量 ... 8.8 升 (537立方英寸)
气缸布置 ... 直列 6 缸
每缸气门数 ... 4
发动机停机时的气门间隙(冷机)
- 进气 ... 0.38 ± 0.08 mm (0.015 ± 0.003 in)
- 排气 ... 0.64 ± 0.08 mm (0.025 ± 0.003 in)
燃烧类型 ... 直喷式
点火次序 ... 1、5、3、6、2、4
曲轴旋向是通过从发动机飞轮侧观看来确定的。 曲轴旋向 ... 逆时针
注: 发动机的前端是指与发动机飞轮端相对的一端。 发动机左右侧是通过由发动机飞轮端观看来确定的。 1 号缸是最前端的气缸。
Caterpillar Information System:
G3612 and G3616 Engines Engine Oil Pan - Remove
3126B Truck Engine Electronic Control System Components
Installation of the 161-0797 Governor Control (Load Share Module) as Service Replacement for the 131-5459 Governor Control (Load Share Module) {4490} Installation of the 161-0797 Governor Control (Load Share Module) as Service Replacement for the 131-5459 Governor Control (Load Share Module) {4490}
3406E and 3456 Engines for Caterpillar Built Machines Solenoid Valve (Compression Brake) - Test
3406E and 3456 Engines for Caterpillar Built Machines Control Valve (Compression Brake) - Test
3406E Generator Set Engines Annunciator Panel - Inspect
G3612 and G3616 Engines Engine Oil Filter Housings - Assemble
C15 Petroleum Generator Set Engines Piston Ring Groove - Inspect
G3612 and G3616 Engines Engine Oil Filter Housings - Disassemble
C15 Petroleum Generator Set Engines Flywheel - Inspect
3114, 3116 and 3126 Engines Unit Injector Cranking Rack Position
C15 Petroleum Generator Set Engines Cylinder Liner Projection - Inspect
3406E and 3456 Engines for Caterpillar Built Machines Pinion Clearance - Adjust
G3612 and G3616 Engines Engine Oil Pan - Install
3126B and 3126E On-highway Engines Alternator - Remove and Install
G3612 and G3616 Engines Engine Oil Pan - Disassemble
G3612 and G3616 Engines Engine Oil Pan - Assemble
3126B and 3126E On-highway Engines Engine Control Module - Remove and Install
G3612 and G3616 Engines Oil Temperature Regulators - Remove and Install
3612 and 3616 Engines Aftercooler - Remove - High Performance Aftercooler
3126B and 3126E On-highway Engines Fan Drive - Remove
G3612 and G3616 Engines Priority Valve - Remove
3126B and 3126E On-highway Engines Fan Drive - Install
3126B and 3126E On-highway Engines Air Compressor - Remove and Install