Vibration Damper - Install
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件说明 | 数量 |
A | 8T-0914 | 飞轮导销 | 2 |
B | 138-7573 | 连杆支架 | 2 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
注: 如果附件模块固定到位且顶置起吊无法进行,按以下步骤安装减振器。 从发动机前部执行安装步骤。
- 将工具 (B) 固定至减振器 (2) 上。 将吊车的链条固定至工具 (B),以便固定底部的减振器和套筒。
- 对齐曲轴前密封适配器上的 1 号上死点位置的标记。
Show/hide table
图 2 g00610082 此图为单个减振器的图示。 - 小心地移动减振器 (2) 至工具 (A) 上的正确位置。
- 安装将减振器固定到位的螺栓。
- 卸下工具 (A) 和工具 (B)。 安装其余的螺栓。
- 将固定减振器到合适位置的螺栓拧紧至扭矩
1350 ± 150 N·m (1000 ± 110 lb ft) 。
Show/hide table
图 1 | g00610083 |
结束:
- 安装减振器护罩总成。
Caterpillar Information System:
C-9 Engines for Caterpillar Built Machines Valve Mechanism Cover
G3612 and G3616 Engines Vibration Damper - Remove
3126B Engines for Caterpillar Built Machines Crankshaft - Install
G3612 and G3616 Engines Vibration Damper - Install
3126B Engines for Caterpillar Built Machines Crankshaft - Remove
SR4B Generators Generator Operation
3126 Truck Engine Military Air Compressor Drive Gear - Install
3126B and 3126E On-highway Engines Air Compressor Drive Gear - Remove and Install
G3612 and G3616 Engines Vibration Damper - Remove
G3612 and G3616 Engines Priority Valve - Assemble
G3612 and G3616 Engines Priority Valve - Disassemble
G3612 and G3616 Engines Priority Valve - Install
3126B Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
3406E Truck Engines BrakeSaver Troubleshooting
3126B and 3126E On-highway Engines Crankshaft Main Bearings - Install
G3612 and G3616 Engines Vibration Damper - Disassemble
3114, 3116, and 3126 Engines for Caterpillar Built Machines Piston Cooling Jets - Remove and Install
3406E Truck Engine BrakeSaver Pull-Down RPM Check
3406E Truck Engine BrakeSaver Klunk Check (Free Movement of the Valve Spool)
3406E Truck Engine BrakeSaver Troubleshooting Problem List
3034 Industrial Engine Engine Description
C-9 Engines for Caterpillar Built Machines Gear Group (Front)
3126 Truck Engine Military Pistons and Connecting Rods - Remove
G3612 and G3616 Engines Vibration Damper - Assemble