Piston Cooling Jets - Remove and Install
拆卸步骤
开始:
- 仅拆卸 3114 发动机上的发动机平衡轴。 请参阅拆解和组装, "发动机平衡轴 - 拆卸和安装"。
- 拆卸发动机机油泵。 请参阅拆解和组装, "发动机机油泵 - 拆卸"。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
Show/hide table
图 1 | g00642470 |
- 拆下螺栓 (1) 和活塞冷却喷嘴 (2) 。
- 拆卸其余的活塞冷却喷嘴。
安装步骤
- 将活塞冷却喷嘴 (2) 放置在缸体中。
Show/hide table
图 2 | g00642470 |
Show/hide table
注意 |
---|
拧紧螺栓前,确保活塞冷却喷嘴正确座合。 |
- 确保活塞冷却喷嘴正确座合,然后安装将活塞冷却喷嘴固定到位的螺栓 (1) 。
- 安装其余的活塞冷却喷嘴。
Show/hide table
注意 |
---|
拧紧安装螺栓时,将活塞冷却喷嘴固定到位。 如果冷却管未固定到位,冷却管可能弯曲或断裂。 |
End By:
- 将发动机平衡轴安装在 3114 发动机上。 请参阅 拆解和组装, "发动机平衡轴 - 拆卸和安装"。
- 安装机油泵。 请参阅 拆解和组装, "发动机机油泵 - 安装"。
Caterpillar Information System:
G3612 and G3616 Engines Vibration Damper - Disassemble
3126B and 3126E On-highway Engines Crankshaft Main Bearings - Install
3406E Truck Engines BrakeSaver Troubleshooting
3126B Engines for Caterpillar Built Machines Crankshaft Main Bearings - Remove
G3612 and G3616 Engines Vibration Damper - Install
C-9 Engines for Caterpillar Built Machines Valve Mechanism Cover
G3612 and G3616 Engines Vibration Damper - Remove
3126B Engines for Caterpillar Built Machines Crankshaft - Install
G3612 and G3616 Engines Vibration Damper - Install
3126B Engines for Caterpillar Built Machines Crankshaft - Remove
SR4B Generators Generator Operation
3126 Truck Engine Military Air Compressor Drive Gear - Install
3406E Truck Engine BrakeSaver Pull-Down RPM Check
3406E Truck Engine BrakeSaver Klunk Check (Free Movement of the Valve Spool)
3406E Truck Engine BrakeSaver Troubleshooting Problem List
3034 Industrial Engine Engine Description
C-9 Engines for Caterpillar Built Machines Gear Group (Front)
3126 Truck Engine Military Pistons and Connecting Rods - Remove
G3612 and G3616 Engines Vibration Damper - Assemble
3114, 3116, and 3126 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
3126B Truck Engine Pistons and Connecting Rods - Disassemble
3034 Engine for Caterpillar Built Machines Crankcase Breather - Remove and Install
3126 Truck Engine Military Pistons and Connecting Rods - Assemble
G3612 and G3616 Engines Crankshaft Front Seal and Wear Sleeve - Remove