Lower Windshield Latches May Be Assembled With An Incorrect Spacer On Certain Excavators
Usage:
EXCAVATORS322L (9RL1056-Up),
322B L (1YS),
325B (7LM1212-1214, 7LM1216-Up),
325B L (2JR),
330L (5YM1620-Up),
330B L (6DR),
345B (4SS),
345B L (4SS, 9GS),
350 (2ZL173-Up),
350L (3ML785-800, 3ML805-Up),
375 (8WJ94-Up),
375L (1JM234-Up),
5080 (8SL81-Up) EXCAVATORS
322B L (1YS),
325B (7LM1212-1214, 7LM1216-Up),
325B L (2JR),
330L (5YM1620-Up),
330B L (6DR),
345B (4SS),
345B L (4SS, 9GS),
350 (2ZL173-Up),
350L (3ML785-800, 3ML805-Up),
375 (8WJ94-Up),
375L (1JM234-Up),
5080 (8SL81-Up) EXCAVATORS
Problem:
If the incorrect spacer is assembled in the lower windshield latch, the lower windshield may not remain in the desired position. The correct spacer will position the latch the proper distance from the windshield and secure the lower windshield in the desired position.
Solution:
The spacer in the 132-6861 Left Hand Latch Assembly and the 132-6862 Right Hand Latch Assembly is not serviced. The correct spacer is 6.0 mm (0.24 inch) thick. The location of the spacer in the latch assembly is shown in Illustration 1.
132-6862 Right Hand Latch Assembly.
Illustration 1.
COPYRIGHT 2000 CATERPILLAR ALL RIGHTS RESERVED
Caterpillar Information System:
Lubrication Of The Bearing In The Fan Belt Tension Pulley On Certain Excavators Lubrication Of The Bearing In The Fan Belt Tension Pulley On Certain Excavators
Operation Of 119-1733 And 134-1346 12-Volt Converters Operation Of 119-1733 And 134-1346 12-Volt Converters
151-6617 Bracket For The Air Conditioner Refrigerant Compressor May Break 151-6617 Bracket For The Air Conditioner Refrigerant Compressor May Break
XT6 Hose on 375 Excavators Replaces the XT5 Hose To Increase Reliability And Durability XT6 Hose on 375 Excavators Replaces the XT5 Hose To Increase Reliability And Durability
Monitor Panel Display Remains In The Self-Test Mode Monitor Panel Display Remains In The Self-Test Mode
Engine Oil Coolers May Leak At The Sealing Surface Between The Oil Cooler And The Engine Block Engine Oil Coolers May Leak At The Sealing Surface Between The Oil Cooler And The Engine Block
Replacing The Damper Assembly On The Engine Crankshaft Replacing The Damper Assembly On The Engine Crankshaft
Wiper Motor Identification Is Explained For Certain Excavators Wiper Motor Identification Is Explained For Certain Excavators
Changing The Pattern Of The Joystick Controls Changing The Pattern Of The Joystick Controls
VIMS-PC Version 2.4 Will Not Open After Installation Of Electronic Technician Version 3.0 VIMS-PC Version 2.4 Will Not Open After Installation Of Electronic Technician Version 3.0
The Cab Door Interior Handle May Become Loose On Certain Excavators The Cab Door Interior Handle May Become Loose On Certain Excavators
Auxiliary Hydraulic Control Pedal Does Not Operate Correctly Auxiliary Hydraulic Control Pedal Does Not Operate Correctly
Restriction Port Indicator May Not Function Restriction Port Indicator May Not Function
VIMSpc99 Version 1.1.7 Is Unable To Open Some Archived Database Files VIMSpc99 Version 1.1.7 Is Unable To Open Some Archived Database Files
Reinstallation Of The Swing Bearing Seal Of Certain Wheeled Excavators Reinstallation Of The Swing Bearing Seal Of Certain Wheeled Excavators
New Software For Medium Track-Type Tractor Models New Software For Medium Track-Type Tractor Models
New Test For Margin Pressure On Implement Hydraulic Pump New Test For Margin Pressure On Implement Hydraulic Pump
Retaining Bolt For The Boom Foot Pin May Loosen Retaining Bolt For The Boom Foot Pin May Loosen
The Piston Locknut for the 155-9255 Bucket Cylinder May Loosen The Piston Locknut for the 155-9255 Bucket Cylinder May Loosen
The Capacity Of The Engine Oil Pan Alters The Recommended Engine Oil Change Interval The Capacity Of The Engine Oil Pan Alters The Recommended Engine Oil Change Interval
Oil Cleanliness Tests Oil Cleanliness Tests
The Steering Cylinder Rods May Have Longitudinal Surface Cracks The Steering Cylinder Rods May Have Longitudinal Surface Cracks
Windshield Wiper Operation May Fail As A Result Of Excessive Tightening Of Mounting Hardware Windshield Wiper Operation May Fail As A Result Of Excessive Tightening Of Mounting Hardware
Electrical Changes In The Operation Of The Oscillating Axle And The Swing Brake Circuits With The M300 In Year 2000 Update Electrical Changes In The Operation Of The Oscillating Axle And The Swing Brake Circuits With The M300 In Year 2000 Update