Operation Of 119-1733 And 134-1346 12-Volt Converters
Usage:
GENERALALL 24 VOLT MACHINES EQUIPPED WITH 12 VOLT RADIOS
Problem:
Some 12-volt converters have been erroneously replaced. The specific complaint has been that the output voltage from the converter is too high (24 volts to 28 volts) when the radio is not connected to the converter and the keyswitch is turned to the "ON" position.
Solution:
The output voltage from the converter should only be checked under the following conditions: the radio is connected to the converter, the keyswitch is turned to the "ON" position, and the radio is turned "ON". When there is no electrical load connected to the converter, it is normal for the converter output voltage to measure between 11 volts and 28 volts. When the radio is turned on, the output voltage from the converter should measure between 11 volts and 14.5 volts.
COPYRIGHT 2000 CATERPILLAR ALL RIGHTS RESERVED
Caterpillar Information System:
151-6617 Bracket For The Air Conditioner Refrigerant Compressor May Break 151-6617 Bracket For The Air Conditioner Refrigerant Compressor May Break
XT6 Hose on 375 Excavators Replaces the XT5 Hose To Increase Reliability And Durability XT6 Hose on 375 Excavators Replaces the XT5 Hose To Increase Reliability And Durability
Monitor Panel Display Remains In The Self-Test Mode Monitor Panel Display Remains In The Self-Test Mode
Engine Oil Coolers May Leak At The Sealing Surface Between The Oil Cooler And The Engine Block Engine Oil Coolers May Leak At The Sealing Surface Between The Oil Cooler And The Engine Block
Replacing The Damper Assembly On The Engine Crankshaft Replacing The Damper Assembly On The Engine Crankshaft
Wiper Motor Identification Is Explained For Certain Excavators Wiper Motor Identification Is Explained For Certain Excavators
Changing The Pattern Of The Joystick Controls Changing The Pattern Of The Joystick Controls
VIMS-PC Version 2.4 Will Not Open After Installation Of Electronic Technician Version 3.0 VIMS-PC Version 2.4 Will Not Open After Installation Of Electronic Technician Version 3.0
The Cab Door Interior Handle May Become Loose On Certain Excavators The Cab Door Interior Handle May Become Loose On Certain Excavators
Auxiliary Hydraulic Control Pedal Does Not Operate Correctly Auxiliary Hydraulic Control Pedal Does Not Operate Correctly
Rubbing And Wear Of Alternator Breaker Wires Rubbing And Wear Of Alternator Breaker Wires
Hydraulic Horsepower Testing Hydraulic Horsepower Testing
Lubrication Of The Bearing In The Fan Belt Tension Pulley On Certain Excavators Lubrication Of The Bearing In The Fan Belt Tension Pulley On Certain Excavators
Lower Windshield Latches May Be Assembled With An Incorrect Spacer On Certain Excavators Lower Windshield Latches May Be Assembled With An Incorrect Spacer On Certain Excavators
Restriction Port Indicator May Not Function Restriction Port Indicator May Not Function
VIMSpc99 Version 1.1.7 Is Unable To Open Some Archived Database Files VIMSpc99 Version 1.1.7 Is Unable To Open Some Archived Database Files
Reinstallation Of The Swing Bearing Seal Of Certain Wheeled Excavators Reinstallation Of The Swing Bearing Seal Of Certain Wheeled Excavators
New Software For Medium Track-Type Tractor Models New Software For Medium Track-Type Tractor Models
New Test For Margin Pressure On Implement Hydraulic Pump New Test For Margin Pressure On Implement Hydraulic Pump
Retaining Bolt For The Boom Foot Pin May Loosen Retaining Bolt For The Boom Foot Pin May Loosen
The Piston Locknut for the 155-9255 Bucket Cylinder May Loosen The Piston Locknut for the 155-9255 Bucket Cylinder May Loosen
The Capacity Of The Engine Oil Pan Alters The Recommended Engine Oil Change Interval The Capacity Of The Engine Oil Pan Alters The Recommended Engine Oil Change Interval
Oil Cleanliness Tests Oil Cleanliness Tests
The Steering Cylinder Rods May Have Longitudinal Surface Cracks The Steering Cylinder Rods May Have Longitudinal Surface Cracks