PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIATOR GROUP ON CERTAIN 315F EXCAVATORS Caterpillar
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIATOR GROUP ON CERTAIN 315F EXCAVATORS
Usage:
TEBE7320-02
Show/hide table
07May2018
(Revised 18Jul2018)
U-263
A-194
D-229
O-234
Show/hide table
After Failure Only
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIATOR GROUP ON CERTAIN 315F EXCAVATORS
1351 1374
PS53750
Show/hide table
NOTE:
Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
NOTE:
This Program can only be administered after a failure occurs.
The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS53750" as the Part Number
and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code.
Show/hide table
Show/hide table
NOTE:
The information supplied in this service letter may not be valid after the termination date of this program.
Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
Show/hide table
Show/hide table
NOTE:
This Revised Service Letter replaces the 07May2018 (Revised 12Jul2018) Service Letter. Changes have been made to the Affected Product to add OEM serial number machines.
Show/hide table
TERMINATION DATE
31May2020
PROBLEM
Show/hide table
The existing radiator may run at very high coolant and hydraulic oil temperatures and cause and overheat warning on certain 315F Excavators.
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Show/hide table
Refer to the attached Rework Procedure.
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
Product smu/age whichever comes first
Caterpillar
Dealer Suggested
Customer Suggested
Parts %
Labor Hrs%
Parts %
Labor Hrs%
Parts %
Labor Hrs%
0-4000 hrs, 0-48 mo
100.0%
100.0%
0.0%
0.0%
0.0%
0.0%
Show/hide table
NOTE: This is a 10.0-hour job
Show/hide table
PARTS DISPOSITION
Show/hide table
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Show/hide table
To rework the machine, refer to UENR6791, Disassembly and Assembly, "Radiator and Aftercooler - Remove and Install", for the procedure to remove and replace the radiator.
Note: Install a new 5P-5649 Seal and 433-7186 Liner to the bottom of the new radiator group before installation to the machine. Ensure that there are no gaps between the liner, seal, and radiator group.