3116 and 3126 Marine Engines Caterpillar


Turbocharger - Inspect

Usage:

3116 1SK
Periodic cleaning is recommended for the turbocharger compressor (inlet side). The following items collect in the turbocharger compressor housing since the fumes from the crankcase travel through the inlet air: oil, by-products from oil and by-products from combustion. The buildup reduces boost and air flow. The buildup also contributes to loss of engine power, increased black smoke, and overall loss of engine efficiency.

Cleaning and Inspecting

  1. Remove the air inlet piping from the turbocharger and remove the compressor housing from the turbocharger.

  2. Clean the turbocharger compressor housing with Hydrosolv Liquid Cleaners and a hard bristle brush.

  3. Clean the turbocharger compressor wheel and clean the backplate assembly with 4C-4079 Brake and Electric Cleaner.

Caterpillar Information System:

G3408 and G3412 Engines Magneto
G3408 and G3412 Engines Gas Pressure Regulator
G3408 and G3412 Engines Flywheel
3606 and 3608 Engines Restriction of Air Inlet and Exhaust
Generator Set Control Panel for Switchgear Conversion CID 0271 FMI 05 Alarm (Action) Current Below Normal - Test
3116 and 3126 Marine Engines Heat Exchanger - Inspect
Generator Set Control Panel for Switchgear Conversion CID 0271 FMI 03 Alarm (Action) Voltage Above Normal - Test
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
G3408 and G3412 Engines Cylinder Liner
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Cooler Bypass Valve - Remove and Install
Generator Set Control Panel for Switchgear Conversion CID 0263 FMI 03 Sensor Power Supply Voltage Above Normal - Test
Generator Set Control Panel for Switchgear Conversion Alert Indicator - Troubleshoot
G3408 and G3412 Engines Governor
G3408 and G3412 Engines Governor Control
Generator Set Control Panel for Switchgear Conversion CID 0271 FMI 06 Alarm (Action) Current Above Normal - Test
G3408 and G3412 Engines Governor Linkage
Generator Set Control Panel for Switchgear Conversion CID 0263 FMI 04 Sensor Power Supply Voltage Below Normal - Test
Generator Set Control Panel for Switchgear Conversion Charging System - Test
P16, P20, P25, P28, P40 and P60 Pulverizers Gerotor Motor - Install
Generator Set Control Panel for Switchgear Conversion Clear/Mode Switch - Troubleshoot
P16, P20, P25, P28, P40 and P60 Pulverizers Gerotor Motor - Disassemble
3606 and 3608 Engines General Information (Lubrication System)
3408E and 3412E Engines for Caterpillar Built Machines Fuel Transfer Pump
3054 and 3056 Industrial and Generator Set Engines Engine Oil Cooler - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.