Temperature Contactor
Show/hide table
 | |
| Illustration 1 | g00541118 |
Show/hide table
| Temperature Contactors (1) | ||
| Contactor | Operating Temperature (2) | Operating Temperature (3) |
| 7C-3888 | 66 ± 2 °C (151 ± 4 °F) |
58 ± 2 °C (136 ± 4 °F) |
| 7C-4926 | 95 ± 2 °C (203 ± 4 °F) |
90 ± 2 °C (194 ± 4 °F) |
| 7C-4927 | 130 ± 3 °C (266 ± 5 °F) |
120 ± 3 °C (248 ± 5 °F) |
| 7C-7156 | 72 ± 2 °C (162 ± 4 °F) |
67 ± 2 °C (153 ± 4 °F) |
| 4W-2637 | 92 ± 2 °C (198 ± 4 °F) |
87 ± 3 °C (189 ± 5 °F) |
| 4W-2640 | 98 ± 2 °C (208 ± 4 °F) |
92 ± 3 °C (198 ± 5 °F) |
| 4W-7793 | 104 ± 2 °C (219 ± 4 °F) |
98 ± 2 °C (208 ± 4 °F) |
Show/hide table
| ( 1 ) | The above temperature contactors have 3 meter capillary tubes. |
| ( 2 ) | When there is an increase in temperature, the contactor operates in the above range. |
| ( 3 ) | When there is a decrease in temperature, the contactor operates in the above range. |
Show/hide table
| Temperature Contactors (1) | ||
| Contactor | Operating Temperature (2) | Operating Temperature (3) |
| 4P-6032 | 66 ± 2 °C (151 ± 4 °F) |
58 ± 2 °C (136 ± 4 °F) |
| 4P-6033 | 92 ± 2 °C (198 ± 4 °F) |
87 ± 3 °C (189 ± 5 °F) |
| 4P-6034 | 95 ± 2 °C (203 ± 4 °F) |
90 ± 2 °C (194 ± 4 °F) |
| 4P-6035 | 98 ± 2 °C (208 ± 4 °F) |
92 ± 3 °C (198 ± 5 °F) |
| 4P-6036 | 104 ± 2 °C (219 ± 4 °F) |
98 ± 2 °C (208 ± 4 °F) |
| 4P-6037 | 130 ± 3 °C (266 ± 5 °F) |
120 ± 3 °C (248 ± 5 °F) |
Show/hide table
| ( 1 ) | The above temperature contactors have 8 meter capillary tubes. |
| ( 2 ) | When there is an increase in temperature, the contactor operates in the above range. |
| ( 3 ) | When there is a decrease in temperature, the contactor operates in the above range. |
Caterpillar Information System:
3612 and 3616 Engines Engine Speed Sensor
3054 Engine for Caterpillar Built Machines V-Belts - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines Spacer Plate - Remove and Install
3606 and 3608 Engines Pressure Contactor
G3408 and G3412 Engines Piston and Rings - Gallery Piston
3412E and C30 Marine Engines Model View Illustrations
Installation Of The 170-3519 Timing Calibration Harness Assembly {1900, 1905} Installation Of The 170-3519 Timing Calibration Harness Assembly {1900, 1905}
3054 Truck Engine Idle RPM - Check/Adjust
3412E, C30 and C32 Marine Engines Turbocharger - Remove
3054 Truck Engine Engine Crankcase Breather - Clean
G3408 and G3412 Engines Connecting Rod
3412E and C30 Engines Front Power Take-Off (FPTO)
G3606 and G3608 Engines Fuel Control Valve - Remove and Install
3054 Engine for Caterpillar Built Machines Camshaft Gear - Remove and Install
3606 and 3608 Engines Temperature Contactor
3500 Locomotive Engines Temperature Contactor - Coolant
3054B Industrial Engine Crankshaft - Remove - 3054 and 3054B Engines
G3606 and G3608 Engines Exhaust Bypass - Remove
3606 and 3608 Engines Temperature Contactor - Coolant
G3606 and G3608 Engines Exhaust Bypass - Disassemble
3606 and 3608 Engines Temperature Contactor
3612 and 3616 Engines Pressure Contactor
G3606 and G3608 Engines Exhaust Bypass - Assemble
3500 Locomotive Engines Pressure Contactor