G3606 and G3608 Engines Caterpillar


Fuel Control Valve - Remove and Install

Usage:

G3606 3XF

拆卸步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。


  1. "断开"外部供油。 通过控油阀断开外部供油。



    图 1g00541121

  1. 卸下螺栓 (1) 。 断开连接件 (2) 。 标记连接件的方向,以便安装。



    图 2g00541124

  1. 从控油阀 (4) 上卸下大号螺母 (3) 。



    图 3g00541126

  1. 断开电气连接 (5) 。

  1. 卸下卡箍 (6) 。



    图 4g00541127

  1. 卸下 6 个螺栓 (7) 和垫圈。

  1. 卸下控油阀 (4) 。 检查密封垫有无磨损或损坏。 必要时更换密封垫。

安装步骤




    图 5g00541127

  1. 定位控油阀 (4) 和垫圈。

  1. 安装 6 个螺栓 (7) 和垫圈。



    图 6g00541126

  1. 安装卡箍 (6) 。 连接电气连接 (5) 。



    图 7g00541124

  1. 将大号螺母 (3) 安装至控油阀 (4) 上。



    图 8g00541121

  1. 连接连接件 (2) 。 安装螺栓 (1) 。 确保连接件的方向正确。

  1. "接通"外部供油。 检查燃油是否泄漏。
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.