Temperature Contactor - Coolant
Show/hide table
Illustration 1 | g00541242 |
(1) Tighten the contactor to the following torque. ... 52 ± 8 N·m (38 ± 6 lb ft)
Actuation temperature ... 98 ± 2 °C (208 ± 3 °F)
Deactuation temperature ... 91 °C (196 °F)
Caterpillar Information System:
3606 and 3608 Engines Temperature Contactor
3054 Engine for Caterpillar Built Machines Camshaft Gear - Remove and Install
G3606 and G3608 Engines Fuel Control Valve - Remove and Install
3606 and 3608 Engines Temperature Contactor
3612 and 3616 Engines Engine Speed Sensor
3054 Engine for Caterpillar Built Machines V-Belts - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines Spacer Plate - Remove and Install
3606 and 3608 Engines Pressure Contactor
G3408 and G3412 Engines Piston and Rings - Gallery Piston
3412E and C30 Marine Engines Model View Illustrations
Installation Of The 170-3519 Timing Calibration Harness Assembly {1900, 1905} Installation Of The 170-3519 Timing Calibration Harness Assembly {1900, 1905}
3054 Truck Engine Idle RPM - Check/Adjust
3054B Industrial Engine Crankshaft - Remove - 3054 and 3054B Engines
G3606 and G3608 Engines Exhaust Bypass - Remove
3606 and 3608 Engines Temperature Contactor - Coolant
G3606 and G3608 Engines Exhaust Bypass - Disassemble
3606 and 3608 Engines Temperature Contactor
3612 and 3616 Engines Pressure Contactor
G3606 and G3608 Engines Exhaust Bypass - Assemble
3500 Locomotive Engines Pressure Contactor
G3408 and G3412 Engines Connecting Rod and Main Bearing Journals
3054 Truck Engine Crankshaft - Install - 3054 and 3054B Engines
G3606 and G3608 Engines Exhaust Manifold - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Injection Actuation Pressure Sensor