Model View Illustrations
The following model views show typical features of 3412E and C30 Marine Engines. Due to your individual applications, your engine may appear different from the illustrations.
Show/hide table
Illustration 1 | g00540818 |
Typical example (1) Turbochargers (2) Air filter elements (3) Fuel transfer pump (4) Crankcase breather (5) Lifting eyes (6) Electronic control module (7) Cooling system filler cap (8) Air intake shutoff (9) Injection actuation pressure control valve (10) Engine oil filler (11) Unit injector hydraulic pump (12) Flywheel housing (13) Engine oil level gauge (14) Heat exchanger (15) Fuel priming pump (16) Primary fuel filter/water separator (17) Secondary fuel filters (18) Jacket water heater (19) Crankcase oil drain plugs (20) Engine oil filters (21) Crankshaft vibration damper (22) Auxiliary water pump |
Caterpillar Information System:
Installation Of The 170-3519 Timing Calibration Harness Assembly {1900, 1905} Installation Of The 170-3519 Timing Calibration Harness Assembly {1900, 1905}
3054 Truck Engine Idle RPM - Check/Adjust
3412E, C30 and C32 Marine Engines Turbocharger - Remove
3054 Truck Engine Engine Crankcase Breather - Clean
G3408 and G3412 Engines Connecting Rod
3412E and C30 Engines Front Power Take-Off (FPTO)
3612 and 3616 Engines Probe Adapter
3612 and 3616 Engines Probe Adapter
3612 and 3616 Engines Temperature Sensor
3612 and 3616 Engines Air Inlet Elbow
3408E and 3412E Engines for Caterpillar Built Machines Injection Actuation Pressure Sensor - Remove and Install
3412E, C30 and C32 Marine Engines Atmospheric Pressure Sensor - Remove and Install
G3408 and G3412 Engines Piston and Rings - Gallery Piston
3606 and 3608 Engines Pressure Contactor
3304B and 3306B Engines for Caterpillar Built Machines Spacer Plate - Remove and Install
3054 Engine for Caterpillar Built Machines V-Belts - Remove and Install
3612 and 3616 Engines Engine Speed Sensor
3606 and 3608 Engines Temperature Contactor
G3606 and G3608 Engines Fuel Control Valve - Remove and Install
3054 Engine for Caterpillar Built Machines Camshaft Gear - Remove and Install
3606 and 3608 Engines Temperature Contactor
3500 Locomotive Engines Temperature Contactor - Coolant
3054B Industrial Engine Crankshaft - Remove - 3054 and 3054B Engines
G3606 and G3608 Engines Exhaust Bypass - Remove