Exhaust Bypass - Disassemble
拆解步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 1P-0510     | 起子总成     | 1     |
开始:
- 卸下废气旁通。 请参阅拆解和装配, "废气旁通 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 卸下螺栓 (1) 和锁。
Show/hide table
图 1 | g00541339 |
- 将板组件 (2) 从壳体组件上卸下。
- 重新定位壳体组件。 拆下螺栓 (3) 和盖 (4) 。
Show/hide table
图 2 | g00541340 |
- 拆下螺栓 (5) 。
Show/hide table
图 3 | g00541341 |
- 从壳体组件上卸下轴 (6) 。
- 如有必要,从轴上卸下挡块和操纵杆。
- 使用工具 (A) 从壳体组件 (7) 上卸下轴承 (8) 。
Show/hide table
图 4 | g00541342 |
Caterpillar Information System:
3606 and 3608 Engines Temperature Contactor - Coolant
G3606 and G3608 Engines Exhaust Bypass - Remove
3054B Industrial Engine Crankshaft - Remove - 3054 and 3054B Engines
3500 Locomotive Engines Temperature Contactor - Coolant
3606 and 3608 Engines Temperature Contactor
3054 Engine for Caterpillar Built Machines Camshaft Gear - Remove and Install
G3606 and G3608 Engines Fuel Control Valve - Remove and Install
3606 and 3608 Engines Temperature Contactor
3612 and 3616 Engines Engine Speed Sensor
3054 Engine for Caterpillar Built Machines V-Belts - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines Spacer Plate - Remove and Install
3606 and 3608 Engines Pressure Contactor
3606 and 3608 Engines Temperature Contactor
3612 and 3616 Engines Pressure Contactor
G3606 and G3608 Engines Exhaust Bypass - Assemble
3500 Locomotive Engines Pressure Contactor
G3408 and G3412 Engines Connecting Rod and Main Bearing Journals
3054 Truck Engine Crankshaft - Install - 3054 and 3054B Engines
G3606 and G3608 Engines Exhaust Manifold - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Injection Actuation Pressure Sensor
3412E and C30 Engines Voltmeter
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump
G3408 and G3412 Engines Engine Design
3054 Engine for Caterpillar Built Machines Crankshaft Front Seal - Remove