Temperature Contactor
Show/hide table
 | |
| Illustration 1 | g00541242 |
(1) Tighten the contactor to the following torque. ... 52 ± 8 N·m (38 ± 6 lb ft)
Actuation temperature ... 102 ± 2 °C (215 ± 3 °F)
Deactuation temperature ... 95 °C (203 °F)
Caterpillar Information System:
G3606 and G3608 Engines Exhaust Bypass - Disassemble
3606 and 3608 Engines Temperature Contactor - Coolant
G3606 and G3608 Engines Exhaust Bypass - Remove
3054B Industrial Engine Crankshaft - Remove - 3054 and 3054B Engines
3500 Locomotive Engines Temperature Contactor - Coolant
3606 and 3608 Engines Temperature Contactor
3054 Engine for Caterpillar Built Machines Camshaft Gear - Remove and Install
G3606 and G3608 Engines Fuel Control Valve - Remove and Install
3606 and 3608 Engines Temperature Contactor
3612 and 3616 Engines Engine Speed Sensor
3054 Engine for Caterpillar Built Machines V-Belts - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines Spacer Plate - Remove and Install
3612 and 3616 Engines Pressure Contactor
G3606 and G3608 Engines Exhaust Bypass - Assemble
3500 Locomotive Engines Pressure Contactor
G3408 and G3412 Engines Connecting Rod and Main Bearing Journals
3054 Truck Engine Crankshaft - Install - 3054 and 3054B Engines
G3606 and G3608 Engines Exhaust Manifold - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Injection Actuation Pressure Sensor
3412E and C30 Engines Voltmeter
3408E and 3412E Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump
G3408 and G3412 Engines Engine Design
3054 Engine for Caterpillar Built Machines Crankshaft Front Seal - Remove
3126 Truck Engine (Military) Extended Life Coolant (ELC)