The Hydraulic Fan Lines Group Has Been Updated on Certain 793F Off-Highway Trucks {1386, 1387, 5057}
- Off-Highway Truck:
- 793F AC (S/N: EMD1-UP)
- 793F (S/N: SND1-UP; SSP1-UP; RBT1-UP)
Description of Change: The tube assembly in the hydraulic fan lines group has been improved with a saddle style boss. The new saddle style boss provides a stronger welded joint and better sealing.
Adaptable To:
Show/hide table
| New Part List | |||
| Item | Qty | Part Number | Description |
| 1 | 1 | 293-0742 | Tube As |
| - | 1 | 235-2479 | Rectangular Seal |
| - | 2 | 238-5084 | O-Ring Seal |
| - | 1 | 6V-4590 | O-Ring Seal |
Show/hide table
 | |
| Illustration 1 | g03482617 |
323-1176 Hydraulic Fan Lines Gp | |
Follow the below procedure to install the tube assembly in the hydraulic fan lines group.
- Prepare the machine for maintenance as per your machine OMM guidelines.
- Drain the fluid from the lines group.
- Remove the old 293-0742 Tube As. Discard the part.
- Install the improved tube assembly (1) with 235-2479 Rectangular Seal at location (A), 238-5084 O-Ring Seals at location (B), and 6V-4590 O-Ring Seal at location (C) as shown in the Illustration 2.
Show/hide table
 | |
| Illustration 2 | g03482619 |
- Refill the fluid and ensure that there is no leakage in the tube assembly.
Show/hide table
| Sales Model | Adaptable to Machines | Effective with Machines |
| 793F | S/N:SSP1-981 | S/N:SSP982-UP |
| 793F AC | S/N:EMD1-77 | S/N:EMD78-UP |
| 793F CMD | S/N:RBT1-171 | S/N:RBT172-UP |
| 793F XQ | S/N:SND1-131 | S/N:SND132-UP |
Caterpillar Information System:
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731} 193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
PL83 and PL87 Pipelayers Engine Supplement Transmission Oil Cooler - Remove and Install
MT4400D AC Off-Highway Truck Steering Linkage - Inspect
MT4400D AC Off-Highway Truck Rear Suspension Link - Inspect
725C2 Articulated Truck Parking Brake Manual Release
2014/02/06 New Cable Assemblies for the Power Train Cable Group are Now used on 795F AC Off-Highway Trucks {1633, 4459}
2013/12/04 A New Bracket Assembly for the Power Train Cable Group is Now Used on Certain 795F AC Off-Highway Trucks {1633, 4459}
2013/12/05 New Cable Assemblies for the Electric Retarder Cable Group are now used on Certain 795F AC Off-Highway Trucks {1633, 4459}
725C, 725C2, 730C and 730C2 Articulated Truck Systems Hoist Control Valve
988K XE Wheel Loader Machine Systems Cab - Remove and Install
CB34B, CB34B XW, CC34B and CB36B Vibratory Utility Compactors Machine Systems Ballast - Remove and Install
CB22B, CB24B, CB32B and CC24B Vibratory Utility Compactors Machine Systems Ballast - Remove and Install
Cat MT4400D AC Off-Highway Truck Advisor Monitoring System Data Link Configuration Status - Test
740 Articulated Truck TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 740 Articulated Truck TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
2013/11/18 An Improved Power Train Installation Procedure Is Now Available for 793F Off-Highway Trucks {7000, 7960}
Procedure to Replace the Differential Bolts on Certain Asphalt Pavers{4050} Procedure to Replace the Differential Bolts on Certain Asphalt Pavers{4050}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053} Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Procedure to Inspect Rotor Coolant Level on Cold Planers{6636} Procedure to Inspect Rotor Coolant Level on Cold Planers{6636}
MT4400D AC Off-Highway Truck Breather (Front Axle) - Replace
988K XE Wheel Loader Machine Systems Piston Pump (Implement) - Remove and Install
Health Interface Module Configuration and Operation Guide for Certain Non-Cat© Excavators{7605} Health Interface Module Configuration and Operation Guide for Certain Non-Cat© Excavators{7605}
Command for Underground Machine Configuration - Configure - Add, Update, and Remove
Procedure to Rework the Final Drive on Certain R1700G Load Haul Dump Machines{4050} Procedure to Rework the Final Drive on Certain R1700G Load Haul Dump Machines{4050}
Installing the 345-6070 ROPS / FOPS Guard Group {7323} Installing the 345-6070 ROPS / FOPS Guard Group {7323}