Piston Pump (Implement) - Remove and Install
- Open cover (1).
Show/hide table
Illustration 2 g03463059 - Disconnect breather assembly (2).
Show/hide table
Illustration 3 g03463067 - Remove bolts (3). Use two people to remove cover (4). The weight of cover (4) is approximately
45 kg (100 lb) .Show/hide tableIllustration 4 g03463078 - Disconnect hose assemblies (5), harness assemblies (6), and tube (7).
Show/hide table
Illustration 5 g03463116 - Attach a suitable lifting device to piston pump (8). The weight of piston pump (8) is approximately
125 kg (275 lb) .Show/hide tableIllustration 6 g03463221 - Remove piston pump (8) and the O-ring seal.
Show/hide table
Illustration 1 | g03463057 |
- Install piston pump (8) in the reverse order of removal.
Caterpillar Information System:
MT4400D AC Off-Highway Truck Breather (Front Axle) - Replace
Procedure to Inspect Rotor Coolant Level on Cold Planers{6636} Procedure to Inspect Rotor Coolant Level on Cold Planers{6636}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053} Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Procedure to Replace the Differential Bolts on Certain Asphalt Pavers{4050} Procedure to Replace the Differential Bolts on Certain Asphalt Pavers{4050}
2013/11/18 An Improved Power Train Installation Procedure Is Now Available for 793F Off-Highway Trucks {7000, 7960}
740 Articulated Truck TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 740 Articulated Truck TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
Cat MT4400D AC Off-Highway Truck Advisor Monitoring System Data Link Configuration Status - Test
2014/01/03 The Hydraulic Fan Lines Group Has Been Updated on Certain 793F Off-Highway Trucks {1386, 1387, 5057}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731} 193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
PL83 and PL87 Pipelayers Engine Supplement Transmission Oil Cooler - Remove and Install
MT4400D AC Off-Highway Truck Steering Linkage - Inspect
MT4400D AC Off-Highway Truck Rear Suspension Link - Inspect
Health Interface Module Configuration and Operation Guide for Certain Non-Cat© Excavators{7605} Health Interface Module Configuration and Operation Guide for Certain Non-Cat© Excavators{7605}
Command for Underground Machine Configuration - Configure - Add, Update, and Remove
Procedure to Rework the Final Drive on Certain R1700G Load Haul Dump Machines{4050} Procedure to Rework the Final Drive on Certain R1700G Load Haul Dump Machines{4050}
Installing the 345-6070 ROPS / FOPS Guard Group {7323} Installing the 345-6070 ROPS / FOPS Guard Group {7323}
2013/10/31 New Horn Is Now Used on 424B Backhoe Loaders {1408}
2013/10/02 New Software for the Turbocharger Protection Strategy on C7.1 Machine Engines {1052, 1901, 1920}
AS4173 Asphalt Screed Machine Systems Temperature Sensor (Electric Heat) - Test
988K XE Wheel Loader Machine Systems Steering Control Valve - Remove and Install
2013/11/01 The Steering Lines Group has been Updated on Certain 773G and 775G Off-Highway Trucks {4304, 5057}
C11 and C13 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
Cat® Command for Dozing, Remote Control Operator Station Cab Mounted Components - Check - Daily
® for Dozing, Semi-Autonomous Tractor System (SATS) Operator Assist Systems