MT4400D AC Off-Highway Truck Caterpillar


Breather (Front Axle) - Replace

Usage:

MT4400D AC MH4

  • Prepare the machine for maintenance. Refer to Operation and Maintenance Manual, "Prepare the Machine for Maintenance".


    Illustration 1g03462996

  • Remove breather (1) for the front axle tank.

  • Install a new breather for the front axle.
  • Caterpillar Information System:

    Procedure to Inspect Rotor Coolant Level on Cold Planers{6636} Procedure to Inspect Rotor Coolant Level on Cold Planers{6636}
    Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053} Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
    Procedure to Replace the Differential Bolts on Certain Asphalt Pavers{4050} Procedure to Replace the Differential Bolts on Certain Asphalt Pavers{4050}
    2013/11/18 An Improved Power Train Installation Procedure Is Now Available for 793F Off-Highway Trucks {7000, 7960}
    740 Articulated Truck TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 740 Articulated Truck TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
    Cat MT4400D AC Off-Highway Truck Advisor Monitoring System Data Link Configuration Status - Test
    2014/01/03 The Hydraulic Fan Lines Group Has Been Updated on Certain 793F Off-Highway Trucks {1386, 1387, 5057}
    193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731} 193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
    PL83 and PL87 Pipelayers Engine Supplement Transmission Oil Cooler - Remove and Install
    MT4400D AC Off-Highway Truck Steering Linkage - Inspect
    MT4400D AC Off-Highway Truck Rear Suspension Link - Inspect
    725C2 Articulated Truck Parking Brake Manual Release
    988K XE Wheel Loader Machine Systems Piston Pump (Implement) - Remove and Install
    Health Interface Module Configuration and Operation Guide for Certain Non-Cat© Excavators{7605} Health Interface Module Configuration and Operation Guide for Certain Non-Cat© Excavators{7605}
    Command for Underground Machine Configuration - Configure - Add, Update, and Remove
    Procedure to Rework the Final Drive on Certain R1700G Load Haul Dump Machines{4050} Procedure to Rework the Final Drive on Certain R1700G Load Haul Dump Machines{4050}
    Installing the 345-6070 ROPS / FOPS Guard Group {7323} Installing the 345-6070 ROPS / FOPS Guard Group {7323}
    2013/10/31 New Horn Is Now Used on 424B Backhoe Loaders {1408}
    2013/10/02 New Software for the Turbocharger Protection Strategy on C7.1 Machine Engines {1052, 1901, 1920}
    AS4173 Asphalt Screed Machine Systems Temperature Sensor (Electric Heat) - Test
    988K XE Wheel Loader Machine Systems Steering Control Valve - Remove and Install
    2013/11/01 The Steering Lines Group has been Updated on Certain 773G and 775G Off-Highway Trucks {4304, 5057}
    C11 and C13 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
    Cat® Command for Dozing, Remote Control Operator Station Cab Mounted Components - Check - Daily
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.