New Software for the Turbocharger Protection Strategy on C7.1 Machine Engines {1052, 1901, 1920}
- Wheel Feller Buncher:
- 2570C (S/N: F1B1-202,204-204,206-216; W571-101)
- Motor Grader:
- 120MSeries 2 (S/N: M9C1-340; M9H1-288,396-396; R9N1-132; M9W1-201; R9W1-104,106-129)
- Wheel Loader:
- 950K (S/N: R4A1-1388; J5M1-471,473-474,479-479; FER1-331)
- 2670C (S/N: B3E1-171,1470-1470; W671-102)
- 563C (S/N: JCB1-324; W631-132)
- 573C (S/N: RJT1-1,252-296; W731-112)
- 120M2 (S/N: M921-102)
- 962K (S/N: T6A1-422; FLL1-234; X4T1-482)
Description of Change: New engine software has been introduced to offer enhanced protection to the turbocharger immediately following engine start in very cold conditions.
The new software holds the engine at a safe speed until the engine systems have stabilized.
The time the engine is held at a safe speed will vary depending on many factors, including ambient temperature, and engine oil grade.
Refer to tables 1, 2 and 3 in order to view the old and the new software part numbers.
Adaptable To:
Show/hide table
Wheel Feller Buncher     | ||
    | Old Part Numbers     | New Part Numbers     |
(S/N: F1B)     | 4221050     | 4445944     |
(S/N: W57)     | 4221050     | 4445944     |
(S/N: B3E)     | 4221043     | 4454973     |
(S/N: W67)     | 4221043     | 4454973     |
(S/N: JCB)     | 4221050     | 4445944     |
(S/N: W63)     | 4221050     | 4445944     |
(S/N: RJT)     | 4221043     | 4454973     |
(S/N: W73)     | 4221043     | 4454973     |
Show/hide table
Motor Graders     | ||
    | Old Part Numbers     | New Part Numbers     |
(S/N: M9C)     | 3918908     | 4333371     |
(S/N: M9H)     | 3918908     | 4333371     |
(S/N: M9N)     | 3918908     | 4333371     |
(S/N: M9W)     | 3918908     | 4333371     |
(S/N: R9N)     | 3918908     | 4333371     |
(S/N: R9W)     | 3918908     | 4333371     |
(S/N: M92)     | 3918908     | 4333371     |
(S/N: M9R)     | 3918908     | 4333371     |
(S/N: R9R)     | 3918908     | 4333371     |
Show/hide table
Medium Wheel Loaders     | ||
    | Old Part Numbers     | New Part Numbers     |
(S/N: FER)     | 3947077     | 4387276     |
(S/N: J5M)     | 3947077     | 4387276     |
(S/N: LRN)     | 3947077     | 4387276     |
(S/N: R4A)     | 3947077     | 4387276     |
(S/N: DPT)     | 3947077     | 4387276     |
(S/N: FLL)     | 3947078     | 4387277     |
(S/N: T6A)     | 3947078     | 4387277     |
(S/N: X4T)     | 3947078     | 4387277     |
Caterpillar Information System:
2013/10/31 New Horn Is Now Used on 424B Backhoe Loaders {1408}
Installing the 345-6070 ROPS / FOPS Guard Group {7323} Installing the 345-6070 ROPS / FOPS Guard Group {7323}
Procedure to Rework the Final Drive on Certain R1700G Load Haul Dump Machines{4050} Procedure to Rework the Final Drive on Certain R1700G Load Haul Dump Machines{4050}
Command for Underground Machine Configuration - Configure - Add, Update, and Remove
Health Interface Module Configuration and Operation Guide for Certain Non-Cat© Excavators{7605} Health Interface Module Configuration and Operation Guide for Certain Non-Cat© Excavators{7605}
988K XE Wheel Loader Machine Systems Piston Pump (Implement) - Remove and Install
MT4400D AC Off-Highway Truck Breather (Front Axle) - Replace
Procedure to Inspect Rotor Coolant Level on Cold Planers{6636} Procedure to Inspect Rotor Coolant Level on Cold Planers{6636}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053} Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Procedure to Replace the Differential Bolts on Certain Asphalt Pavers{4050} Procedure to Replace the Differential Bolts on Certain Asphalt Pavers{4050}
2013/11/18 An Improved Power Train Installation Procedure Is Now Available for 793F Off-Highway Trucks {7000, 7960}
740 Articulated Truck TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 740 Articulated Truck TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
AS4173 Asphalt Screed Machine Systems Temperature Sensor (Electric Heat) - Test
988K XE Wheel Loader Machine Systems Steering Control Valve - Remove and Install
2013/11/01 The Steering Lines Group has been Updated on Certain 773G and 775G Off-Highway Trucks {4304, 5057}
C11 and C13 Engines for Caterpillar Built Machines Finding Top Center Position for No. 1 Piston
Cat® Command for Dozing, Remote Control Operator Station Cab Mounted Components - Check - Daily
® for Dozing, Semi-Autonomous Tractor System (SATS) Operator Assist Systems
2013/11/06 New Product Link and VIMS3G Software for 523, PLVIMS Modules Is Now Available for Certain Small Off-Highway Trucks {7601, 7606}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705} Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
AS4173 Asphalt Screed Machine Systems Control Panel (Screed) - Test
2013/10/14 Procedure to Rework the Final Drives Now Available for Certain R1700G Load Haul Dump Machines {4050}
Command for Underground Web Diagnostics - Access
Command for Underground Automation Operator Station CAN Bus - Test