Transmission Oil Cooler - Remove and Install
Removal Procedure
Start By:
- Remove the front center bottom guard.
- Remove the right engine side guard.
- Refer to Operation and Maintenance Manual, "Cooling System (ELC) Coolant - Change" for the correct draining and filling procedure.
- Disconnect tube assemblies (3). Disconnect harness assembly (1). Remove bolts (2) .
Show/hide table
Illustration 1 | g02213113 |
- Disconnect bolts (5). Use two people in order to remove power train oil cooler (4). The weight of power train oil cooler (4) is approximately 39 kg (86 lb).
Show/hide table
Illustration 2 | g02213553 |
Installation Procedure
- Install power train oil cooler (4) in the reverse order of removal.
Caterpillar Information System:
MT4400D AC Off-Highway Truck Steering Linkage - Inspect
MT4400D AC Off-Highway Truck Rear Suspension Link - Inspect
725C2 Articulated Truck Parking Brake Manual Release
2014/02/06 New Cable Assemblies for the Power Train Cable Group are Now used on 795F AC Off-Highway Trucks {1633, 4459}
2013/12/04 A New Bracket Assembly for the Power Train Cable Group is Now Used on Certain 795F AC Off-Highway Trucks {1633, 4459}
2013/12/05 New Cable Assemblies for the Electric Retarder Cable Group are now used on Certain 795F AC Off-Highway Trucks {1633, 4459}
725C, 725C2, 730C and 730C2 Articulated Truck Systems Hoist Control Valve
988K XE Wheel Loader Machine Systems Cab - Remove and Install
CB34B, CB34B XW, CC34B and CB36B Vibratory Utility Compactors Machine Systems Ballast - Remove and Install
CB22B, CB24B, CB32B and CC24B Vibratory Utility Compactors Machine Systems Ballast - Remove and Install
Command for Underground Software Versions - Check
Command for Underground Steer Tune - Update
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731} 193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
2014/01/03 The Hydraulic Fan Lines Group Has Been Updated on Certain 793F Off-Highway Trucks {1386, 1387, 5057}
Cat MT4400D AC Off-Highway Truck Advisor Monitoring System Data Link Configuration Status - Test
740 Articulated Truck TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 740 Articulated Truck TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
2013/11/18 An Improved Power Train Installation Procedure Is Now Available for 793F Off-Highway Trucks {7000, 7960}
Procedure to Replace the Differential Bolts on Certain Asphalt Pavers{4050} Procedure to Replace the Differential Bolts on Certain Asphalt Pavers{4050}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053} Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Procedure to Inspect Rotor Coolant Level on Cold Planers{6636} Procedure to Inspect Rotor Coolant Level on Cold Planers{6636}
MT4400D AC Off-Highway Truck Breather (Front Axle) - Replace
988K XE Wheel Loader Machine Systems Piston Pump (Implement) - Remove and Install
Health Interface Module Configuration and Operation Guide for Certain Non-Cat© Excavators{7605} Health Interface Module Configuration and Operation Guide for Certain Non-Cat© Excavators{7605}
Command for Underground Machine Configuration - Configure - Add, Update, and Remove