New Cable Assemblies for the Power Train Cable Group are Now used on 795F AC Off-Highway Trucks {1633, 4459}
- Off-Highway Truck:
- 795F AC (S/N: ERM1-UP)
Description of Change: The power train cable group for the machines listed above has been updated with new cable assemblies. The new drive motor cables are wrapped with Electromagnetic Interface (EMI) shielding which provide EMI resistance to the signal. The new EMI wrapped cables reduces the noise and impact on signal wires from the final drive lube and temperature sensors.
Adaptable To:
Show/hide table
Illustration 1 | g03482656 |
284-5858 Power Train Cable Gp |
Replace the former parts with respective new parts in the 284-5858 Power Train Cable Gp that are listed in Table 1.
Show/hide table
Qty     | New Part     | Description     | Former Part     |
1     | 448-1336     | Cable As     | 338-1469     |
1     | 448-1337     | Cable As     | 338-1470     |
1     | 448-1338     | Cable As     | 338-1471     |
1     | 448-1339     | Cable As     | 338-1472     |
1     | 448-1340     | Cable As     | 338-1473     |
1     | 448-1341     | Cable As     | 338-1474     |
1     | 448-1874     | Block     | 314-9323     |
1     | 448-1875     | Block     | 314-9325     |
The new cable assemblies are adaptable to machines ERM1-284 and effective in production with machines ERM285-UP.
Caterpillar Information System:
2013/12/04 A New Bracket Assembly for the Power Train Cable Group is Now Used on Certain 795F AC Off-Highway Trucks {1633, 4459}
2013/12/05 New Cable Assemblies for the Electric Retarder Cable Group are now used on Certain 795F AC Off-Highway Trucks {1633, 4459}
725C, 725C2, 730C and 730C2 Articulated Truck Systems Hoist Control Valve
988K XE Wheel Loader Machine Systems Cab - Remove and Install
CB34B, CB34B XW, CC34B and CB36B Vibratory Utility Compactors Machine Systems Ballast - Remove and Install
CB22B, CB24B, CB32B and CC24B Vibratory Utility Compactors Machine Systems Ballast - Remove and Install
Command for Underground Software Versions - Check
Command for Underground Steer Tune - Update
C15 and C18 Engines for Caterpillar Built Machines Exhaust Temperature Is High
2013/12/04 A New Special Instruction is Available to Improve the Truck Hood Group on the 793F, 793F CMD, and 793F XQ Off-Highway Trucks {0679, 7051, 7251, 7251}
PL83 and PL87 Pipelayers Engine Supplement Air Cleaner - Remove and Install
725C, 725C2, 730C and 730C2 Articulated Truck Systems Piston Pump (Hydraulic, Steering, Hoist)
725C2 Articulated Truck Parking Brake Manual Release
MT4400D AC Off-Highway Truck Rear Suspension Link - Inspect
MT4400D AC Off-Highway Truck Steering Linkage - Inspect
PL83 and PL87 Pipelayers Engine Supplement Transmission Oil Cooler - Remove and Install
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731} 193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
2014/01/03 The Hydraulic Fan Lines Group Has Been Updated on Certain 793F Off-Highway Trucks {1386, 1387, 5057}
Cat MT4400D AC Off-Highway Truck Advisor Monitoring System Data Link Configuration Status - Test
740 Articulated Truck TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} 740 Articulated Truck TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
2013/11/18 An Improved Power Train Installation Procedure Is Now Available for 793F Off-Highway Trucks {7000, 7960}
Procedure to Replace the Differential Bolts on Certain Asphalt Pavers{4050} Procedure to Replace the Differential Bolts on Certain Asphalt Pavers{4050}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053} Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Procedure to Inspect Rotor Coolant Level on Cold Planers{6636} Procedure to Inspect Rotor Coolant Level on Cold Planers{6636}