Correction to Specifications , "Fan Drive" {1359}
- Load Haul Dump:
- R1700G (S/N: SBR1-UP)
The information for the fan hub has been updated. Refer to the following updated information.
Show/hide table
 | |
| Illustration 1 | g01332492 |
(1) Lubricate the seal lips with bearing lubricant.
(2) Apply 169-5464 Quick Cure Primer and then apply 9S-3263 Thread Lock Compound to the threads of the bolt prior to assembly.
- Torque for the bolt ... 115 ± 15 N·m (85 ± 11 lb ft)
(3) Lubricate the fan adapter cavity with 30 grams of bearing lubricant.
(4) Lubricate the cavity between the bearings with 10 grams of bearing lubricant.
Caterpillar Information System:
777F Off-Highway Truck Machine Systems Front Wheel, Bearing and Duo-Cone Seal - Remove - Caliper Brakes
AQUILATM AQ2DB6 Installation
AQUILATM AQ2DB6 System Requirements
AQUILATM AQ2DB6 General Information
246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Systems Control Valve (Work Tool) - Install - High Flow
777F Off-Highway Truck Machine Systems Service Brake (Front Oil Cooled) - Install
New Cover for the Liquid Level Gauge for Transmission Oil {7479} New Cover for the Liquid Level Gauge for Transmission Oil {7479}
246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Systems Control Valve (Work Tool) - Disassemble - High Flow
770 and 772 Off-Highway Truck Chassis Electronic Control System MID 087 - CID 0168 - FMI 04
773D Off-Highway Truck Steering System Relief Valve (Primary Steering Backup) - Test and Adjust
770 and 772 Off-Highway Truck Chassis Electronic Control System MID 087 - CID 0168 - FMI 03
770 and 772 Off-Highway Trucks Power Train Torque Converter
2008/07/14 Improved Tilt Cylinder Relief Valves are Now Used for the Main Control Valve {5117}
246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Systems Control Valve (Work Tool) - Assemble - High Flow
773D Off-Highway Truck Steering System Piston Pump (Steering) Pressure - Test and Adjust
AQUILATM AQ2DB6 Data Source Setup
2007/01/22 An Improved Auxiliary Water Pump is Used {1361, 1371}
AQUILATM AQ2DB6 Getting Started
2006/12/25 A New Integral Seal for C15 Engines is Now Used {1380}
AQUILATM AQ2DB6 Schedule Setup
AQUILATM AQ2DB6 Operator Setup
AQUILATM AQ2DB6 Work Code Setup
AQUILATM AQ2DB6 Machine Setup
AQUILATM AQ2DB6 Service Configuration