AQUILATM AQ2DB6 Caterpillar


System Requirements

Usage:

- DNA

Operating System

Aquila Database Configurator (ADC) will run on WindowsTM NT, WindowsTM 2000, WindowsTM XP and WindowsTM 2003 systems.

Hardware

The hardware requirements for the ADC is minimal. ADC requires approximately 10 Megabytes of disk space and a computer sufficient to run one of the required operating systems.

Database

Database Types

Currently AQ2DB6 will only work with an Oracle database.

Database Connectivity

ADC uses an ODBC connection in order to connect to an Oracle database. Versions 8i and greater of Oracle are currently supported.

In Pit, On Board Software Compatibility

AQ2DB Version 6 is not fully compatible with V4 on-board systems. Avoid a mixed fleet of on-board systems. In order to maintain V6.x and V4 on-board systems, two versions of AQ2DB and two separate databases must be maintained.

Historical Data Support

Historically, the V4 data can be stored into the new V6 database schema. In order to store the V4 data onto the new V6 database schema, the original V4 productivity files must be reprocessed into the new database.

Caterpillar Information System:

AQUILATM AQ2DB6 General Information
246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Systems Control Valve (Work Tool) - Install - High Flow
777F Off-Highway Truck Machine Systems Service Brake (Front Oil Cooled) - Install
New Cover for the Liquid Level Gauge for Transmission Oil {7479} New Cover for the Liquid Level Gauge for Transmission Oil {7479}
246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Systems Control Valve (Work Tool) - Disassemble - High Flow
770 and 772 Off-Highway Truck Chassis Electronic Control System MID 087 - CID 0168 - FMI 04
773D Off-Highway Truck Steering System Relief Valve (Primary Steering Backup) - Test and Adjust
770 and 772 Off-Highway Truck Chassis Electronic Control System MID 087 - CID 0168 - FMI 03
770 and 772 Off-Highway Trucks Power Train Torque Converter
700 Family Articulated Trucks - Resolution to Source of Oil Leaks at Test Points{4257, 5051, 5057, 5137} 700 Family Articulated Trucks - Resolution to Source of Oil Leaks at Test Points{4257, 5051, 5057, 5137}
770 and 772 Off-Highway Trucks Power Train Gear Pump (Power Train)
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 0588 - FMI 14
AQUILATM AQ2DB6 Installation
777F Off-Highway Truck Machine Systems Front Wheel, Bearing and Duo-Cone Seal - Remove - Caliper Brakes
2006/12/18 Correction to Specifications , "Fan Drive" {1359}
2008/07/14 Improved Tilt Cylinder Relief Valves are Now Used for the Main Control Valve {5117}
246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Systems Control Valve (Work Tool) - Assemble - High Flow
773D Off-Highway Truck Steering System Piston Pump (Steering) Pressure - Test and Adjust
AQUILATM AQ2DB6 Data Source Setup
2007/01/22 An Improved Auxiliary Water Pump is Used {1361, 1371}
AQUILATM AQ2DB6 Getting Started
2006/12/25 A New Integral Seal for C15 Engines is Now Used {1380}
AQUILATM AQ2DB6 Schedule Setup
AQUILATM AQ2DB6 Operator Setup
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.