450E Backhoe Loader Caterpillar


Differential Oil (Rear) - Change

Usage:

450E EBL
The oil change interval should be decreased to 500 hours if more than 50% of the service hours is used for roading and loading.


Illustration 1g01357706

  1. Remove the three oil drain plugs (1) and drain the oil into a suitable container.

  2. Clean the drain plugs and install the drain plugs.

  3. Remove oil level/fill plug (2).

  4. Add oil until the oil is level with the threads for the filler plug. Refer to Operation and Maintenance Manual, "Lubricant Viscosities" and Operation and Maintenance Manual, "Capacities (Refill)" for oil.

  5. Clean the filler plug and install the filler plug.

Caterpillar Information System:

414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Lift Cylinder (3-Point Hitch)
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Tilt Cylinder (3-Point Hitch) - Implement
450E Backhoe Loader Transport Position
450E Backhoe Loader Swing Lock Pin Control
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Bank Valve (Four) (3-Point Hitch)
246C, 256C, 262C and 272C Skid Steer Loaders Radiator Core - Clean
450E Backhoe Loader Equipment Lowering with Engine Stopped
450E Backhoe Loader Swing Frame and Cylinder Bearings - Lubricate
2006/07/24 Correction to Disassembly and Assembly , "Axle Housing (Service Brakes, Differential, and Bevel Gear) - Assemble" {3256, 3258, 3260, 4251}
Load Haul Dump Machine Machining & Welding Information Cab Mounting
Load Haul Dump Machine Machining & Welding Information Front Frame
Load Haul Dump Machine Machining & Welding Information Rear Frame
450E Backhoe Loader Differential Oil Level (Rear) - Check
AccuGrade® GPS Display Description
2006/07/24 Correction to Testing and Adjusting , "Piston Pump Low Pressure Standby - Test" {5070}
2006/07/24 Correction to Testing and Adjusting , "Travel on Level Ground - Test and Adjust" {5070}
Filtration Procedure for Off-Highway Truck Transmission and Torque Converter Oil {0680, 0768, 3016, 3030, 3101} Filtration Procedure for Off-Highway Truck Transmission and Torque Converter Oil {0680, 0768, 3016, 3030, 3101}
AccuGrade® GPS Avoidance Zone - Set - Avoidance Zone Option
2006/07/24 Correction to Testing and Adjusting , "Piston Pump (Constant Horsepower Flow Control) - Test and Adjust" {5070}
AccuGrade® GPS Configuration
2006/08/28 Improved Lip Seals Are Used in the Transfer Gear Groups {1164, 3159}
2006/08/07 Check the Access Hole for the Wear Indicator for the Front Brakes {4251, 4267}
2006/09/11 New Pad Assembly Is Available for Backhoes with an Extendable Stick {6533}
Check for the Proper Assembly of the Steering Wheel {4309, 4310, 4343} Check for the Proper Assembly of the Steering Wheel {4309, 4310, 4343}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.