Swing Frame and Cylinder Bearings - Lubricate
Show/hide table
| |
| Illustration 1 | g01412250 |
Apply lubricant to the grease fitting (1) for the boom lock. Repeat for the opposite side.
Apply lubricant to the grease fittings (2) for the bearing on the top of the swing cylinders.
Apply lubricant to the grease fitting (3) for the bearing on the bottom of the swing cylinder. Repeat for the other swing cylinder.
Apply lubricant to the grease fitting (4) for the top swing pin.
Apply lubricant to the grease fitting (5) for the bottom swing pin.
Apply lubricant to the grease fitting (6) for the eye of the swing cylinder. Repeat for the other swing cylinder.
There are a total of ten grease fittings.
Caterpillar Information System:
2006/07/24 Correction to Disassembly and Assembly , "Axle Housing (Service Brakes, Differential, and Bevel Gear) - Assemble" {3256, 3258, 3260, 4251}
Load Haul Dump Machine Machining & Welding Information Cab Mounting
Load Haul Dump Machine Machining & Welding Information Front Frame
Load Haul Dump Machine Machining & Welding Information Rear Frame
Load Haul Dump Machine Machining & Welding Information Consumables
450E Backhoe Loader Backhoe Four Lever Control - If Equipped
450E Backhoe Loader Joystick Control - Backhoe
246C, 256C, 262C and 272C Skid Steer Loaders Fire Extinguisher Location
450E Backhoe Loader Operator Controls
793D Off-Highway Truck/Tractor Control Valve (Hoist) - Install
793D Off-Highway Truck/Tractor Control Valve (Hoist) - Remove
D6K Track-Type Tractor Electrohydraulic Power Train Track Roller
450E Backhoe Loader Equipment Lowering with Engine Stopped
246C, 256C, 262C and 272C Skid Steer Loaders Radiator Core - Clean
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Bank Valve (Four) (3-Point Hitch)
450E Backhoe Loader Swing Lock Pin Control
450E Backhoe Loader Transport Position
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Tilt Cylinder (3-Point Hitch) - Implement
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Lift Cylinder (3-Point Hitch)
450E Backhoe Loader Differential Oil (Rear) - Change
450E Backhoe Loader Differential Oil Level (Rear) - Check
AccuGrade® GPS Display Description
2006/07/24 Correction to Testing and Adjusting , "Piston Pump Low Pressure Standby - Test" {5070}
2006/07/24 Correction to Testing and Adjusting , "Travel on Level Ground - Test and Adjust" {5070}