Illustration 1 | g00876894 |
Bucket Dump (1) - Move the lever to this position in order to empty the bucket. |
Hold (2) - Move the lever to this position in order to stop bucket movement. The lever will return to the HOLD position when the lever is released from the Bucket Dump position or from the Bucket Load position.
Bucket Load (3) - Move the lever to this position in order to fill the bucket. |
Stick Out (4) - Move the lever to this position in order to move the stick outward. |
Hold (5) - Move the lever to this position in order to stop stick movement. The lever will return to the HOLD position when the lever is released from the Stick Out position or from the Stick In position.
Stick In (6) - Move the lever to this position in order to move in the stick. |
Lower Boom (7) - Move the lever to this position in order to lower the boom. |
Hold (8) - Move the lever to this position in order to stop boom movement. The lever will return to the HOLD position when the lever is released from the Lower Boom position or from the Raise Boom position.
Raise Boom (9) - Move the lever to this position in order to raise the boom. |
Swing Left (10) - Move the lever to this position in order to swing the boom to the left. |
Hold (11) - Move the lever to this position in order to stop swing movement. The lever will return to the HOLD position when the lever is released from the Swing Left position or from the Swing Right position.
Swing Right (12) - Move the lever to this position in order to swing the boom to the right. |
Illustration 2 | g00876894 |
Stick Out (1) - Move the lever to this position in order to move the stick outward. |
Hold (2) - Move the lever to this position in order to stop stick movement. The lever will return to the HOLD position when the lever is released from the Stick Out position or from the Stick In position.
Stick In (3) - Move the lever to this position in order to move in the stick. |
Lower Boom (4) - Move the lever to this position in order to lower the boom. |
Hold (5) - Move the lever to this position in order to stop boom movement. The lever will return to the HOLD position when the lever is released from the Lower Boom position or from the Raise Boom position.
Raise Boom (6) - Move the lever to this position in order to raise the boom. |
Bucket Dump (7) - Move the lever to this position in order to empty the bucket. |
Hold (8) - Move the lever to this position in order to stop bucket movement. The lever will return to the HOLD position when the lever is released from the Bucket Dump position or from the Bucket Load position.
Bucket Load (9) - Move the lever to this position in order to fill the bucket. |
Swing Left (10) - Move the lever to this position in order to swing the boom to the left. |
Hold (11) - Move the lever to this position in order to stop swing movement. The lever will return to the HOLD position when the lever is released from the Swing Left position or from the Swing Right position.
Swing Right (12) - Move the lever to this position in order to swing the boom to the right. |
Extendable Stick (If Equipped)
Illustration 3 | g01289875 |
STICK EXTEND (1) - Move the pedal to this position in order to extend the stick. |
HOLD (2) - The pedal will return to the HOLD position when the pedal is released from the STICK EXTEND position or from the STICK RETRACT position. Stick movement will stop.
STICK RETRACT (3) - Move the pedal to this position in order to retract the stick. |
Auxiliary Control (If Equipped)
Illustration 4 | g01289896 |
The auxiliary foot pedal controls the function of a work tool. If the machine is equipped with an extendable stick, the auxiliary control will be on the left foot pedal. If the machine is not equipped with an extendable stick, the auxiliary control will be on the right foot pedal.
ON (1) - Move the pedal to this position in order to pressurize the hydraulic line on the right side of the machine.
OFF (2) - The pedal will return to the HOLD position when the pedal is released.
ON (3) - Move the pedal to this position in order to pressurize the hydraulic line on the left side of the machine.
Note: The operation of the controls will vary depending on the work tool. While you operate the machine and the work tool slowly in an open area, check the operation of all controls for the work tool.