Control Valve (Hoist) - Install
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | 138-7575     | 连杆支架     | 1     |
B     | 1U-9200     | 操纵杆滚轮起重机     | 1     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
注: 检查 O 形密封圈。 更换过度磨损或损坏的 O 型密封圈。
- 使用工具 (A) 和工具 (B) 安装举倾控制阀 (12) 。 举倾控制阀 (12) 的重量约为 191 kg (420 lb)。
Show/hide table
图 1 | g01289626 |
- 安装螺栓 (13) 。
Show/hide table
图 2 | g01289628 |
- 连接管组件 (11) 。
Show/hide table
图 3 | g01289622 |
- 连接软管组件 (10) 。 连接软管组件 (9) 。 安装夹子 (8) 。
Show/hide table
图 4 | g01289617 |
- 放置好线束组件 (6) ,然后安装电缆束带 (7) 。 安装线束组件 (6) 。 连接软管组件 (5) 。
Show/hide table
图 5 | g01289615 |
Show/hide table
图 6 | g01289605 |
- 连接软管组件 (4) 。
Show/hide table
图 7 | g01289601 |
- 连接软管组件 (3) 。 安装管组件 (1) 。 连接软管组件 (2) 。
Show/hide table
图 8 | g01289595 |
- 向液压油箱注油。 参阅操作和保养手册, "加注容量"。
Caterpillar Information System:
793D Off-Highway Truck/Tractor Control Valve (Hoist) - Remove
D6K Track-Type Tractor Electrohydraulic Power Train Track Roller
572R Series II Pipelayer Hydraulic System Hydraulic Tank and Filter
The Hoses that connect to the Brake Reservoir are Too Long{4269} The Hoses that connect to the Brake Reservoir are Too Long{4269}
450E Backhoe Loader Transmission Magnetic Screen - Clean
2006/07/31 Bearing Inserts Are Now Used in Frame Steering Bracket {7051, 7073}
450E Backhoe Loader Transmission Oil Sample - Obtain
2006/11/27 An Improved Elbow and a Tube for the Coolant Lines Is Used {1380}
450E Backhoe Loader Transmission Oil Level - Check
RM-300 Reclaimer Mixer Machine Systems Rotor Drive Differential - Install
C175-16 Locomotive Engine Valve Lash - Adjust
RM-300 Reclaimer Mixer Machine Systems Rotor Drive Differential - Remove
450E Backhoe Loader Operator Controls
246C, 256C, 262C and 272C Skid Steer Loaders Fire Extinguisher Location
450E Backhoe Loader Joystick Control - Backhoe
450E Backhoe Loader Backhoe Four Lever Control - If Equipped
Load Haul Dump Machine Machining & Welding Information Consumables
Load Haul Dump Machine Machining & Welding Information Rear Frame
Load Haul Dump Machine Machining & Welding Information Front Frame
Load Haul Dump Machine Machining & Welding Information Cab Mounting
2006/07/24 Correction to Disassembly and Assembly , "Axle Housing (Service Brakes, Differential, and Bevel Gear) - Assemble" {3256, 3258, 3260, 4251}
450E Backhoe Loader Swing Frame and Cylinder Bearings - Lubricate
450E Backhoe Loader Equipment Lowering with Engine Stopped
246C, 256C, 262C and 272C Skid Steer Loaders Radiator Core - Clean