Hydraulic Tank and Filter
Show/hide table
Illustration 1 | g01290427 |
(1) Torque for the locknuts that hold the sight glass ... 30 ± 5 N·m (22 ± 4 lb ft)
(2) Hand tighten the vacuum breaker.
Vacuum Relief ... 2 ± 1 kPa (0.29 ± 0.15 psi)
Pressure Relief ... 180 ± 21 kPa (26 ± 3 psi)
(3) 7B-3039 Spring for the drain valve
- Length under test force ... 26.2 mm (1.03 inch)
- Test force ... 15.6 ± 1.2 N (3.51 ± 0.27 lb)
- Free length after test ... 36.6 mm (1.44 inch)
- Outside diameter ... 19.8 mm (0.78 inch)
- Test force ... 15.6 ± 1.2 N (3.51 ± 0.27 lb)
(4) Torque for the drain plug in the tank ... 68 ± 7 N·m (50 ± 5 lb ft)
(5) Torque for the bolt that holds the filter ... 60 ± 7 N·m (44 ± 5 lb ft)
(6) Torque for the bolt that holds the filter ... 60 ± 7 N·m (44 ± 5 lb ft)
Caterpillar Information System:
The Hoses that connect to the Brake Reservoir are Too Long{4269} The Hoses that connect to the Brake Reservoir are Too Long{4269}
450E Backhoe Loader Transmission Magnetic Screen - Clean
2006/07/31 Bearing Inserts Are Now Used in Frame Steering Bracket {7051, 7073}
450E Backhoe Loader Transmission Oil Sample - Obtain
2006/11/27 An Improved Elbow and a Tube for the Coolant Lines Is Used {1380}
450E Backhoe Loader Transmission Oil Level - Check
RM-300 Reclaimer Mixer Machine Systems Rotor Drive Differential - Install
C175-16 Locomotive Engine Valve Lash - Adjust
RM-300 Reclaimer Mixer Machine Systems Rotor Drive Differential - Remove
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Braking System Brake Accumulator
AccuGrade® GPS System Components
450E Backhoe Loader Transmission Oil Filter - Replace
D6K Track-Type Tractor Electrohydraulic Power Train Track Roller
793D Off-Highway Truck/Tractor Control Valve (Hoist) - Remove
793D Off-Highway Truck/Tractor Control Valve (Hoist) - Install
450E Backhoe Loader Operator Controls
246C, 256C, 262C and 272C Skid Steer Loaders Fire Extinguisher Location
450E Backhoe Loader Joystick Control - Backhoe
450E Backhoe Loader Backhoe Four Lever Control - If Equipped
Load Haul Dump Machine Machining & Welding Information Consumables
Load Haul Dump Machine Machining & Welding Information Rear Frame
Load Haul Dump Machine Machining & Welding Information Front Frame
Load Haul Dump Machine Machining & Welding Information Cab Mounting
2006/07/24 Correction to Disassembly and Assembly , "Axle Housing (Service Brakes, Differential, and Bevel Gear) - Assemble" {3256, 3258, 3260, 4251}