450E Backhoe Loader Caterpillar


Transmission Magnetic Screen - Clean

Usage:

450E EBL

  • Drain the transmission oil. Refer to Operation and Maintenance Manual, "Transmission Oil - Change".


    Illustration 1g03105699

  • Remove the magnetic strainer cover.

  • Remove the magnets from the housing.

  • Remove the screen from the housing.

  • Wash the tube and the screen in a clean, nonflammable solvent.


    NOTICE

    Do not drop or rap the magnets against any hard objects. Replace any damaged magnets.


  • Clean the magnets with a cloth, with a stiff bristle brush, or with pressure air.

  • Install the magnets and the tube assembly into the magnetic screen.

  • Install the magnetic screen.

  • Clean the cover and inspect the seal. Replace the seal, if the seal is damaged.

  • Install the cover. Tighten the cover bolts.

  • Fill the transmission. Refer to Operation and Maintenance Manual, "Transmission Oil - Change".
  • Caterpillar Information System:

    2006/07/31 Bearing Inserts Are Now Used in Frame Steering Bracket {7051, 7073}
    450E Backhoe Loader Transmission Oil Sample - Obtain
    2006/11/27 An Improved Elbow and a Tube for the Coolant Lines Is Used {1380}
    450E Backhoe Loader Transmission Oil Level - Check
    RM-300 Reclaimer Mixer Machine Systems Rotor Drive Differential - Install
    C175-16 Locomotive Engine Valve Lash - Adjust
    RM-300 Reclaimer Mixer Machine Systems Rotor Drive Differential - Remove
    814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Braking System Brake Accumulator
    AccuGrade® GPS System Components
    450E Backhoe Loader Transmission Oil Filter - Replace
    450E Backhoe Loader Transmission Oil - Change
    450E Backhoe Loader Hydraulic System Oil Filter - Replace
    The Hoses that connect to the Brake Reservoir are Too Long{4269} The Hoses that connect to the Brake Reservoir are Too Long{4269}
    572R Series II Pipelayer Hydraulic System Hydraulic Tank and Filter
    D6K Track-Type Tractor Electrohydraulic Power Train Track Roller
    793D Off-Highway Truck/Tractor Control Valve (Hoist) - Remove
    793D Off-Highway Truck/Tractor Control Valve (Hoist) - Install
    450E Backhoe Loader Operator Controls
    246C, 256C, 262C and 272C Skid Steer Loaders Fire Extinguisher Location
    450E Backhoe Loader Joystick Control - Backhoe
    450E Backhoe Loader Backhoe Four Lever Control - If Equipped
    Load Haul Dump Machine Machining & Welding Information Consumables
    Load Haul Dump Machine Machining & Welding Information Rear Frame
    Load Haul Dump Machine Machining & Welding Information Front Frame
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.