Rear Frame
后机架尺寸
R1300G 和 R1300G 系列 II 地下内燃铲运机
Show/hide table
图 1 | g02650337 |
Show/hide table
后机架机加工尺寸     | ||
位置     | 尺寸     | 材料技术规格     |
D1     | 99.90 + 0.00 - 0.02 mm (3.933 + 0.000 - 0.0008 in)     |
MS106     |
D2     | 77.5 ± 0.07 mm (3.051 ± 0.0028 in)     |
MS106     |
D3     | 100.05 + 0.00 - 0.02 mm (3.939 + 0.000 - 0.0008 in)     |
MS106     |
D4     | 84.15 + 0.03 - 0.00 mm (3.313 + 0.001 - 0.000 in)     |
MS109     |
D5     | 161.85 + 0.00 - 0.02 mm (6.372 + 0.000 - 0.0008 in)     |
MS106     |
S1     | 84.00 + 0.00 - 0.10 mm (3.307 + 0.000 - 0.004 in)     |
MS109     |
R1600G 地下内燃铲运机
Show/hide table
图 2 | g02650356 |
Show/hide table
后机架机加工尺寸     | ||
位置     | 尺寸     | 材料技术规格     |
D1     | 99.90 + 0.00 - 0.02 mm (3.933 + 0.000 - 0.0008 in)     |
MS108 MS109     |
D2     | 84.8 mm (3.339 in)     |
MS108     |
D3     | 100.05 + 0.00 - 0.02 mm (3.939 + 0.000 - 0.0008 in)     |
MS108     |
D4     | 161.85 + 0.00 - 0.02 mm (6.372 + 0.000 - 0.0008 in)     |
MS107 MS106     |
D5     | 60.15 + 0.03 - 0.00 mm (2.368 + 0.001 - 0.000 in)     |
MS109     |
S1     | 66.00 mm (2.598 in)     |
MS106     |
R1700G 8XZ1-以上和 R1700G ; SBR1-590 地下内燃铲运机
Show/hide table
图 3 | g02652257 |
Show/hide table
R1700G 8XZ1-以上后机架机加工尺寸 和 R1700G SBR1-590 后机架机加工尺寸     |
||
位置     | 尺寸     | 材料技术规格     |
D1     | 99.90 + 0.00 - 0.02 mm (3.933 + 0.000 - 0.0008 in)     |
MS106     |
D2     | 84.8 ± 0.03 mm (3.339 ± 0.0012 in)     |
MS106     |
D3     | 100.05 + 0.00 - 0.02 mm (3.939 + 0.000 - 0.0008 in)     |
MS106     |
D4     | 161.85 + 0.00 - 0.02 mm (6.372 + 0.000 - 0.0008 in)     |
MS106 MS109     |
D5     | 84.15 + 0.03 - 0.00 mm (3.313 + 0.001 - 0.000 in)     |
MS106     |
S1     | 83.00 mm (3.268 in)     |
MS107 MS108     |
R1700G SBR591-以上地下内燃铲运机
Show/hide table
图 4 | g02654416 |
Show/hide table
R1700G SBR591-以上后机架机加工尺寸     | ||
位置     | 尺寸     | 材料技术规格     |
D1     | 84.15 + 0.03 - 0.00 mm (3.313 + 0.001 - 0.000 in)     |
MS106     |
D2     | 120.62 + 0.03 - 0.00 mm (4.748 + 0.001 - 0.000 in)     |
MS106 MS108     |
D3     | 84.8 ± 0.03 mm (3.339 ± 0.0012 in)     |
MS106     |
D4     | 89.94 + 0.00 - 0.03 mm (3.540 + 0.000 - 0.001 in)     |
MS106 MS108     |
D5     | 161.85 + 0.00 - 0.02 mm (6.372 + 0.000 - 0.0008 in)     |
MS109     |
S1     | 83 mm (3.268 in)     |
MS107 MS108     |
R2900G 地下内燃铲运机
Show/hide table
图 5 | g02654537 |
Show/hide table
后机架机加工尺寸     | ||
位置     | 尺寸     | 材料技术规格     |
D1     | 120.62 + 0.03 - 0.00 mm (4.748 + 0.001 - 0.000 in)     |
MS108     |
D2     | 84.8 ± 0.10 mm (3.338 ± 0.004 in)     |
MS108     |
D3     | 89.94 + 0.00 - 0.03 mm (3.541 + 0.000 - 0.001 in)     |
MS108     |
D4     | 212.69 + 0.00 - 0.02 mm (8.373 + 0.000 - 0.0008 in)     |
MS109     |
D5     | 84.15 + 0.03 - 0.00 mm (3.313 + 0.001 - 0.000 in)     |
MS106 MS109     |
S1     | 83.00 mm (3.268 in)     |
MS106     |
后机架转向挡块修理程序
R1300G 和 R1300G 系列 II 地下内燃铲运机
Show/hide table
图 6 | g01228036 |
Show/hide table
后机架转向挡块冲击区     | ||
位置     | 尺寸     | 材料技术规格     |
L1     | 50 mm (1.96 in)     |
MS106     |
R1600G 地下内燃铲运机
Show/hide table
图 7 | g01228037 |
Show/hide table
后机架转向挡块冲击区     | ||
位置     | 尺寸     | 材料技术规格     |
L1     | 95 mm (3.74 in)     |
MS106     |
R1700G 地下内燃铲运机
Show/hide table
图 8 | g01228038 |
Show/hide table
后机架转向挡块冲击区     | ||
位置     | 尺寸     | 材料技术规格     |
L1     | 83 mm (3.26 in)     |
MS106     |
L2     | 56 mm (2.20 in)     |
MS106     |
R2900G 地下内燃铲运机
Show/hide table
图 9 | g01228364 |
Show/hide table
后机架转向挡块冲击区     | ||
位置     | 尺寸     | 材料技术规格     |
L1     | 41 mm (1.61 in)     |
MS106     |
后机架转向挡块堆焊程序
- 清除转向挡块 (1) 上的全部 "菌状锤痕"。
- 将转向挡块 (1) 打磨齐平。
- 将转向挡块预热到 50 °C (122 °F)。 通过排焊将转向挡块 (1) 堆焊到需要的高度。
- 堆积足够的材料后,将每个转向挡块打磨平整,以获得所维修机器的初始轮廓。
- 检查和调整转向空档器阀。 请参阅所维修机器的系统操作、测试和调整, "转向空档器阀 - 检查和调整"。
Caterpillar Information System:
Load Haul Dump Machine Machining & Welding Information Consumables
450E Backhoe Loader Backhoe Four Lever Control - If Equipped
450E Backhoe Loader Joystick Control - Backhoe
246C, 256C, 262C and 272C Skid Steer Loaders Fire Extinguisher Location
450E Backhoe Loader Operator Controls
793D Off-Highway Truck/Tractor Control Valve (Hoist) - Install
793D Off-Highway Truck/Tractor Control Valve (Hoist) - Remove
D6K Track-Type Tractor Electrohydraulic Power Train Track Roller
572R Series II Pipelayer Hydraulic System Hydraulic Tank and Filter
The Hoses that connect to the Brake Reservoir are Too Long{4269} The Hoses that connect to the Brake Reservoir are Too Long{4269}
450E Backhoe Loader Transmission Magnetic Screen - Clean
2006/07/31 Bearing Inserts Are Now Used in Frame Steering Bracket {7051, 7073}
Load Haul Dump Machine Machining & Welding Information Front Frame
Load Haul Dump Machine Machining & Welding Information Cab Mounting
2006/07/24 Correction to Disassembly and Assembly , "Axle Housing (Service Brakes, Differential, and Bevel Gear) - Assemble" {3256, 3258, 3260, 4251}
450E Backhoe Loader Swing Frame and Cylinder Bearings - Lubricate
450E Backhoe Loader Equipment Lowering with Engine Stopped
246C, 256C, 262C and 272C Skid Steer Loaders Radiator Core - Clean
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Bank Valve (Four) (3-Point Hitch)
450E Backhoe Loader Swing Lock Pin Control
450E Backhoe Loader Transport Position
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Tilt Cylinder (3-Point Hitch) - Implement
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Lift Cylinder (3-Point Hitch)
450E Backhoe Loader Differential Oil (Rear) - Change