414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Caterpillar


Bank Valve (Four) (3-Point Hitch)

Usage:

414E ELB



Illustration 1g01351821

285-1187 Bank Valve Gp (three-point hitch)

(1) Pump port

(2) Inlet manifold

(3) Tank port

(4) A port

(5) Control valve for the Auxiliary

(6) Control valve for the Pitch

(7) Control valve for the Tilt

(8) Control valve for the Lift

(9) B port

(10) Load signal port

(11) Handle for the manual control

(12) Torque for the nuts ... 25 ± 2 N·m (18 ± 2 lb ft)

(13) Torque for the allen head bolts screws. ... 8.0 ± 0.5 N·m (75 ± 4 lb in)




Illustration 2g01351639

(1) Pump port

(2) Inlet manifold

(3) Tank port

(14) Pressure Reducing Valve

(15) Relief Valve

(14) The 308-5637 Pressure Reducing Valve

Torque ... 25 ± 3 N·m (18 ± 2 lb ft)

(15) The 308-5635 Relief Valve

Pressure Setting ... 20685 kPa (3000 psi)
Torque ... 20 ± 3 N·m (15 ± 2 lb ft)

Caterpillar Information System:

246C, 256C, 262C and 272C Skid Steer Loaders Radiator Core - Clean
450E Backhoe Loader Equipment Lowering with Engine Stopped
450E Backhoe Loader Swing Frame and Cylinder Bearings - Lubricate
2006/07/24 Correction to Disassembly and Assembly , "Axle Housing (Service Brakes, Differential, and Bevel Gear) - Assemble" {3256, 3258, 3260, 4251}
Load Haul Dump Machine Machining & Welding Information Cab Mounting
Load Haul Dump Machine Machining & Welding Information Front Frame
Load Haul Dump Machine Machining & Welding Information Rear Frame
Load Haul Dump Machine Machining & Welding Information Consumables
450E Backhoe Loader Backhoe Four Lever Control - If Equipped
450E Backhoe Loader Joystick Control - Backhoe
246C, 256C, 262C and 272C Skid Steer Loaders Fire Extinguisher Location
450E Backhoe Loader Operator Controls
450E Backhoe Loader Swing Lock Pin Control
450E Backhoe Loader Transport Position
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Tilt Cylinder (3-Point Hitch) - Implement
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Lift Cylinder (3-Point Hitch)
450E Backhoe Loader Differential Oil (Rear) - Change
450E Backhoe Loader Differential Oil Level (Rear) - Check
AccuGrade® GPS Display Description
2006/07/24 Correction to Testing and Adjusting , "Piston Pump Low Pressure Standby - Test" {5070}
2006/07/24 Correction to Testing and Adjusting , "Travel on Level Ground - Test and Adjust" {5070}
Filtration Procedure for Off-Highway Truck Transmission and Torque Converter Oil {0680, 0768, 3016, 3030, 3101} Filtration Procedure for Off-Highway Truck Transmission and Torque Converter Oil {0680, 0768, 3016, 3030, 3101}
AccuGrade® GPS Avoidance Zone - Set - Avoidance Zone Option
2006/07/24 Correction to Testing and Adjusting , "Piston Pump (Constant Horsepower Flow Control) - Test and Adjust" {5070}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.