Correction to Testing and Adjusting , "Piston Pump Low Pressure Standby - Test" {5070}
- Track Feller Buncher:
- 511 (S/N: 5111-UP)
- 521 (S/N: 5211-UP)
- 522 (S/N: 5221-UP)
- 532 (S/N: 5321-UP)
- 541 (S/N: 5411-UP)
- 551 (S/N: 5511-UP)
- 552 (S/N: 5521-UP)
- TK711 (S/N: 1011-UP)
- TK721 (S/N: 1021-UP)
- TK722 (S/N: 1031-UP)
- TK732 (S/N: 1041-UP)
- TK741 (S/N: 2021-UP)
- TK751 (S/N: 3011-UP)
- TK752 (S/N: 3021-UP)
The step that provides the pressure specification is incorrect. The correct step follows.
Record the reading on the display. The standby pressure for the left pump and the right pump should be between 3800 kPa (550 psi) and 4500 kPa (650 psi). If the pressure is incorrect, shut off the engine.
Caterpillar Information System:
AccuGrade® GPS Display Description
450E Backhoe Loader Differential Oil Level (Rear) - Check
450E Backhoe Loader Differential Oil (Rear) - Change
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Lift Cylinder (3-Point Hitch)
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Tilt Cylinder (3-Point Hitch) - Implement
450E Backhoe Loader Transport Position
450E Backhoe Loader Swing Lock Pin Control
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Bank Valve (Four) (3-Point Hitch)
246C, 256C, 262C and 272C Skid Steer Loaders Radiator Core - Clean
450E Backhoe Loader Equipment Lowering with Engine Stopped
450E Backhoe Loader Swing Frame and Cylinder Bearings - Lubricate
2006/07/24 Correction to Disassembly and Assembly , "Axle Housing (Service Brakes, Differential, and Bevel Gear) - Assemble" {3256, 3258, 3260, 4251}
2006/07/24 Correction to Testing and Adjusting , "Travel on Level Ground - Test and Adjust" {5070}
Filtration Procedure for Off-Highway Truck Transmission and Torque Converter Oil {0680, 0768, 3016, 3030, 3101} Filtration Procedure for Off-Highway Truck Transmission and Torque Converter Oil {0680, 0768, 3016, 3030, 3101}
AccuGrade® GPS Avoidance Zone - Set - Avoidance Zone Option
2006/07/24 Correction to Testing and Adjusting , "Piston Pump (Constant Horsepower Flow Control) - Test and Adjust" {5070}
AccuGrade® GPS Configuration
2006/08/28 Improved Lip Seals Are Used in the Transfer Gear Groups {1164, 3159}
2006/08/07 Check the Access Hole for the Wear Indicator for the Front Brakes {4251, 4267}
2006/09/11 New Pad Assembly Is Available for Backhoes with an Extendable Stick {6533}
Check for the Proper Assembly of the Steering Wheel {4309, 4310, 4343} Check for the Proper Assembly of the Steering Wheel {4309, 4310, 4343}
AccuGrade® GPS Beeper - Set - Beeper Option
AccuGrade® GPS Brightness - Set - Display Brightness Option
Installation of New Handrails{7150, 7253, 7256, 7319} Installation of New Handrails{7150, 7253, 7256, 7319}