Correction to Disassembly and Assembly , "Axle Housing (Service Brakes, Differential, and Bevel Gear) - Assemble" {3256, 3258, 3260, 4251}
- Paving Compactor:
- CP-563E (S/N: BWE1-UP; CNT1-UP)
- CP-573E (S/N: ASY1-UP; ASZ1-UP)
- CS-563E (S/N: ASA1-UP; CNG1-UP)
- CS-573E (S/N: CEB1-UP; CNN1-UP)
- CS-583E (S/N: DAJ1-UP; CNX1-UP)
Step 5 contains the following correction. Dimension (B) has changed from 145 mm (5.7 inch) to 130 mm (5.118 inch). Dimension (C) has been changed from 45 mm (1.8 inch) to 50 mm (1.969 inch). Refer to the following paragraph.
Show/hide table
Illustration 1 | g01075956 |
- Use Tooling (K) in order to measure Distance (A). Distance (B) equals 130 mm (5.118 inch). Distance (C) equals 50 mm (1.969 inch). Use the following formula in order to calculate Measurement (X) : A mm + C mm - B mm = X mm. Record Measurement (X) .
Caterpillar Information System:
Load Haul Dump Machine Machining & Welding Information Cab Mounting
Load Haul Dump Machine Machining & Welding Information Front Frame
Load Haul Dump Machine Machining & Welding Information Rear Frame
Load Haul Dump Machine Machining & Welding Information Consumables
450E Backhoe Loader Backhoe Four Lever Control - If Equipped
450E Backhoe Loader Joystick Control - Backhoe
246C, 256C, 262C and 272C Skid Steer Loaders Fire Extinguisher Location
450E Backhoe Loader Operator Controls
793D Off-Highway Truck/Tractor Control Valve (Hoist) - Install
793D Off-Highway Truck/Tractor Control Valve (Hoist) - Remove
D6K Track-Type Tractor Electrohydraulic Power Train Track Roller
572R Series II Pipelayer Hydraulic System Hydraulic Tank and Filter
450E Backhoe Loader Swing Frame and Cylinder Bearings - Lubricate
450E Backhoe Loader Equipment Lowering with Engine Stopped
246C, 256C, 262C and 272C Skid Steer Loaders Radiator Core - Clean
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Bank Valve (Four) (3-Point Hitch)
450E Backhoe Loader Swing Lock Pin Control
450E Backhoe Loader Transport Position
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Tilt Cylinder (3-Point Hitch) - Implement
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Lift Cylinder (3-Point Hitch)
450E Backhoe Loader Differential Oil (Rear) - Change
450E Backhoe Loader Differential Oil Level (Rear) - Check
AccuGrade® GPS Display Description
2006/07/24 Correction to Testing and Adjusting , "Piston Pump Low Pressure Standby - Test" {5070}