| |
| Illustration 1 | g01101163 |
|
Roading pin in the installed position | |
Machines that are equipped with an extendable stick must have the transport pin in place for roading.
| |
| Illustration 2 | g01101167 |
|
Roading pin in the stowed position | |
Machines that are equipped with an extendable stick must remove the transport pin in order to operate the machine.
| |
| Illustration 3 | g01411856 |
Move the backhoe to the transport position in the following situations:
- You are using the loader.
- You are loading the machine on a truck or on a trailer.
- You are roading the machine.
| NOTICE |
|---|
|
The bucket may hit the stabilizers of the machine or the rear of the cab with certain boom and stick combinations. Always check for interference when first operating a new work tool. |
Boom Transport Lock - Close the bucket and move in the stick completely. Move the boom upward until the boom is completely retracted.
- Raise the boom to the full UP position.
- Raise the boom lock lever in order to engage the boom lock.
- Move the boom lever to the DOWN position in order to force the boom against the boom lock hook.
Boom Swing Lock Pin - Install the pin when you are roading the machine for long distances or when you haul the machine on a truck or on a trailer.
Additional locking devices for work tools are required in some countries. Remove locking devices before operations begin.