Transmission Oil Filter - Replace
The transmission filter is located on the left side of the machine .
Show/hide table
Illustration 1 | g01412282 |
- Remove the transmission oil filter element with a strap type wrench.
- Clean the filter element mounting base. Remove any part of the filter element gasket that remains on the filter element mounting base.
- Apply a light coat of oil to the gasket of the new filter element.
- Install the new oil filter by hand.
Instructions for the installation of the filter are printed on the side of each Caterpillar spin-on filter. For non-Caterpillar filters, refer to the installation instructions that are provided by the supplier of the filter.
- Start the engine and apply the service brake. Slowly operate the transmission controls in order to circulate the transmission oil.
- Move the transmission control lever to NEUTRAL and engage the parking brake. Inspect the filter element for leaks.
Show/hide table
Illustration 2 g01289187 - Check the transmission oil level. Refer to Operation and Maintenance Manual, "Transmission Oil Level - Check" for more information.
- Stop the engine.
Caterpillar Information System:
450E Backhoe Loader Transmission Oil - Change
450E Backhoe Loader Hydraulic System Oil Filter - Replace
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 2176 - FMI 06
RM-300 Reclaimer Mixer Machine Systems Rotor Transmission - Assemble
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 2176 - FMI 05
RM-300 Reclaimer Mixer Machine Systems Rotor Transmission - Disassemble
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 2176 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 2175 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 2175 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 2175 - FMI 03
Effectivity of the Upgrades to Remanufactured Transmissions, Torque Converters, and Wheel Assemblies{3030, 3101, 4051} Effectivity of the Upgrades to Remanufactured Transmissions, Torque Converters, and Wheel Assemblies{3030, 3101, 4051}
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System MID 027 - CID 1408 - FMI 13
AccuGrade® GPS System Components
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Braking System Brake Accumulator
RM-300 Reclaimer Mixer Machine Systems Rotor Drive Differential - Remove
C175-16 Locomotive Engine Valve Lash - Adjust
RM-300 Reclaimer Mixer Machine Systems Rotor Drive Differential - Install
450E Backhoe Loader Transmission Oil Level - Check
2006/11/27 An Improved Elbow and a Tube for the Coolant Lines Is Used {1380}
450E Backhoe Loader Transmission Oil Sample - Obtain
2006/07/31 Bearing Inserts Are Now Used in Frame Steering Bracket {7051, 7073}
450E Backhoe Loader Transmission Magnetic Screen - Clean
The Hoses that connect to the Brake Reservoir are Too Long{4269} The Hoses that connect to the Brake Reservoir are Too Long{4269}
572R Series II Pipelayer Hydraulic System Hydraulic Tank and Filter