Hub Oil Level (Flexxaire Fan) - Check
Catatan: Before you proceed, ensure that you know the correct model of the hydraulic actuated fan.
Perform the following procedure in order to check the oil level in the fan hub.
Checking the Oil Level on the Hub of the FX 2000 Hydraulic Actuated Fan
Show/hide table
Ilustrasi 1 | g00920295 |
- Rotate the hub until one of the oil drain plugs (1) is facing upward.
- Remove oil drain plug (1).
Show/hide table
Ilustrasi 2 g00920296 - Insert an appropriate dipstick into the hub. Use the dipstick to measure distance (A). Distance (A) should be between
82,55 mm (3,25 inch) and85,72 mm (3,375 inch) . Add oil, if necessary. Refer to Operation and Maintenance Manual, "Hub Oil (Flexxaire Fan) - Add" for the proper procedure to add oil. - Apply Sealant 6V-6640 to the threads of oil drain plug (1). Reinstall oil drain plug (1).
- Check for leaks. A low oil level may indicate that a leak is present. Check the oil level of the hub more often, if the oil level is consistently low.
Caterpillar Information System:
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2113 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2113 - FMI 03
2006/10/30 Improved Hoist Cylinders Are Used {5102}
583T Pipelayer Engine Supplement Engine Side Guards - Remove and Install
773F Off-Highway Truck and 775F Off-Highway Truck Power Train Power Train Hydraulic System Troubleshooting
C4.4 Industrial Engine Finding Top Center Position for No. 1 Piston
770 and 772 Off-Highway Truck Daily Inspection
1390 Track Feller Buncher Hub Oil (Flexxaire Fan) - Change
1390 Track Feller Buncher Hub Oil (Flexxaire Fan) - Add
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125} Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
1090, 1190, 1190T and 1290T Track Feller Bunchers Hood Tilting
C11 and C15 Engines for Caterpillar Built Machines Electrical Connectors - Inspect
773G and 775G Off-Highway Truck Power Train Relief Valve (Torque Converter Inlet) Pressure - Test
325D Material Handler Circuit Breakers - Reset
773F Off-Highway Truck and 775F Off-Highway Truck Power Train Relief Valve (Torque Converter Outlet) Pressure - Test and Adjust
2006/05/08 A New Location for the Dipstick is Now Used on the Rotor Transmission on Reclaimer Mixers {3030}
Installing the 258-3639 Backhoe Mounting Gp (Kit) or the 367-9770 Backhoe Mounting Gp (Kit){6504} Installing the 258-3639 Backhoe Mounting Gp (Kit) or the 367-9770 Backhoe Mounting Gp (Kit){6504}
770 and 772 Off-Highway Trucks Automatic Lubrication System Lubrication System
2012/02/27 A New Serviceable Accumulator is Available {5077}
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System MID 039 - CID 0356 - FMI 03
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System MID 039 - CID 0356 - FMI 05
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System MID 039 - CID 0356 - FMI 06
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System MID 039 - CID 0356 - FMI 13
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System MID 039 - CID 2474 - FMI 13