Engine Side Guards - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Bracket     | 1     |
- Remove door assemblies (1) .
Show/hide table
Illustration 1 | g01268114 |
- Attach Tooling (A) and a suitable lifting device to engine side guard (3). The weight of engine side guard (3) is approximately 25 kg (56 lb).
Show/hide table
Illustration 2 | g01268117 |
- Remove bolts (2) and bolts (4). Remove bolt (5) (not shown).
- Use the suitable lifting device in order to remove engine side guard (3) .
- Repeat Steps 1 through 3 for the opposite side of the machine.
- Remove cable straps (6) from harness assembly (7) .
Show/hide table
Illustration 3 | g01268120 |
Show/hide table
Illustration 4 | g01268347 |
- Use the suitable lifting device in order to remove engine side guard (8) .
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Bracket     | 1     |
- Use Tooling (A) and a suitable lifting device in order to position engine side guard (3). The weight of engine side guard (3) is approximately 25 kg (56 lb).
Show/hide table
Illustration 5 | g01268117 |
- Install bolt (5) (not shown). Install bolts (4) and (2) .
- Install door assemblies (1) .
Show/hide table
Illustration 6 | g01268114 |
- Repeat Step 1 and Step 2 for the opposite side of the machine.
- Position harness assembly (7) to engine side guard (8). Install cable straps (6) .
Show/hide table
Illustration 7 | g01268120 |
- Repeat Step 3 for the opposite side of the machine.
Caterpillar Information System:
773F Off-Highway Truck and 775F Off-Highway Truck Power Train Power Train Hydraulic System Troubleshooting
C4.4 Industrial Engine Finding Top Center Position for No. 1 Piston
770 and 772 Off-Highway Truck Daily Inspection
1390 Track Feller Buncher Hub Oil (Flexxaire Fan) - Change
1390 Track Feller Buncher Hub Oil (Flexxaire Fan) - Add
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125} Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
1090, 1190, 1190T and 1290T Track Feller Bunchers Hood Tilting
C11 and C15 Engines for Caterpillar Built Machines Electrical Connectors - Inspect
773F Off-Highway Truck and 775F Off-Highway Truck Power Train Rear Axle and Final Drive System
583T Pipelayer Engine Supplement Bottom Guard - Install
583T Pipelayer Engine Supplement Bottom Guard - Remove
1090, 1190, 1190T and 1290T Track Feller Bunchers Monitoring System - Information about System Operation
2006/10/30 Improved Hoist Cylinders Are Used {5102}
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2113 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2113 - FMI 04
1390 Track Feller Buncher Hub Oil Level (Flexxaire Fan) - Check
773G and 775G Off-Highway Truck Power Train Relief Valve (Torque Converter Inlet) Pressure - Test
325D Material Handler Circuit Breakers - Reset
773F Off-Highway Truck and 775F Off-Highway Truck Power Train Relief Valve (Torque Converter Outlet) Pressure - Test and Adjust
2006/05/08 A New Location for the Dipstick is Now Used on the Rotor Transmission on Reclaimer Mixers {3030}
Installing the 258-3639 Backhoe Mounting Gp (Kit) or the 367-9770 Backhoe Mounting Gp (Kit){6504} Installing the 258-3639 Backhoe Mounting Gp (Kit) or the 367-9770 Backhoe Mounting Gp (Kit){6504}
770 and 772 Off-Highway Trucks Automatic Lubrication System Lubrication System
2012/02/27 A New Serviceable Accumulator is Available {5077}
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System MID 039 - CID 0356 - FMI 03