Bottom Guard - Install
Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 5P-3050 | Floor Jack Gp | 1 |
- Use Tooling (A) in order to position bottom guard (5). The weight of bottom guard (5) is approximately 102 kg (224 lb).
Show/hide table
 | |
| Illustration 1 | g01268060 |
- Install nuts (6) .
- Remove Tooling (A). Tighten nuts (6) .
- Install pins (4) to bottom guard (5) .
Show/hide table
 | |
| Illustration 2 | g01268013 |
- Use Tooling (A) in order to position bottom guard (2). The weight of bottom guard (2) is approximately 88 kg (193 lb).
Show/hide table
 | |
| Illustration 3 | g01267938 |
- Install nuts (3) .
- Remove Tooling (A). Tighten nuts (3) .
- Install pins (1) to bottom guard (2) .
Show/hide table
 | |
| Illustration 4 | g01267937 |
Caterpillar Information System:
583T Pipelayer Engine Supplement Bottom Guard - Remove
1090, 1190, 1190T and 1290T Track Feller Bunchers Monitoring System - Information about System Operation
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Position Sensor (Rear Steering) - Remove and Install
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 0600 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 0600 - FMI 03
12M Motor Grader Oil Filter (Implement Controls) - Replace
120M and 12M Motor Graders Oil Filter (Hydraulic Tank Return) - Replace
14L Motor Grader Oil Filter (All Wheel Drive) - Replace - If Equipped
773F Off-Highway Truck and 775F Off-Highway Truck Power Train Visual Inspection (Power Train)
773F Off-Highway Truck and 775F Off-Highway Truck Power Train General Information
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 0590 - FMI 09
773F Off-Highway Truck and 775F Off-Highway Truck Power Train System Information (Power Train)
773F Off-Highway Truck and 775F Off-Highway Truck Power Train Rear Axle and Final Drive System
C11 and C15 Engines for Caterpillar Built Machines Electrical Connectors - Inspect
1090, 1190, 1190T and 1290T Track Feller Bunchers Hood Tilting
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125} Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
1390 Track Feller Buncher Hub Oil (Flexxaire Fan) - Add
1390 Track Feller Buncher Hub Oil (Flexxaire Fan) - Change
770 and 772 Off-Highway Truck Daily Inspection
C4.4 Industrial Engine Finding Top Center Position for No. 1 Piston
773F Off-Highway Truck and 775F Off-Highway Truck Power Train Power Train Hydraulic System Troubleshooting
583T Pipelayer Engine Supplement Engine Side Guards - Remove and Install
2006/10/30 Improved Hoist Cylinders Are Used {5102}
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2113 - FMI 03