Hood Tilting
Hydraulically Controlled Hood
Show/hide table
Illustration 1 | g01177882 |
This machine is equipped with a hydraulically controlled hood. A switch is used in order to control the operation of the hood.
Switch for the hood
Show/hide table
Illustration 2 | g01162103 |
Switch (21) operates the hood. Switch (21) is located on the right console. |
Show/hide table
Open hood - Push the top of the switch in order to open the hood. |
Show/hide table
Close Hood - Push the bottom of the switch in order to close the hood. |
Opening the hood with no electrical power
Use the following procedure in order to open the hood if there is no electrical power.
- Remove three bolts in order to open the access door on the right side of the machine.
- Connect the appropriate jump start cable to the auxiliary jump start receptacle on the stalled machine.
- Enter the cab and turn the ignition key to the ON position.
- Operate the switch for the hood in order to open the hood.
Caterpillar Information System:
C11 and C15 Engines for Caterpillar Built Machines Electrical Connectors - Inspect
773F Off-Highway Truck and 775F Off-Highway Truck Power Train Rear Axle and Final Drive System
583T Pipelayer Engine Supplement Bottom Guard - Install
583T Pipelayer Engine Supplement Bottom Guard - Remove
1090, 1190, 1190T and 1290T Track Feller Bunchers Monitoring System - Information about System Operation
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Position Sensor (Rear Steering) - Remove and Install
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 0600 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 0600 - FMI 03
12M Motor Grader Oil Filter (Implement Controls) - Replace
120M and 12M Motor Graders Oil Filter (Hydraulic Tank Return) - Replace
14L Motor Grader Oil Filter (All Wheel Drive) - Replace - If Equipped
773F Off-Highway Truck and 775F Off-Highway Truck Power Train Visual Inspection (Power Train)
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125} Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
1390 Track Feller Buncher Hub Oil (Flexxaire Fan) - Add
1390 Track Feller Buncher Hub Oil (Flexxaire Fan) - Change
770 and 772 Off-Highway Truck Daily Inspection
C4.4 Industrial Engine Finding Top Center Position for No. 1 Piston
773F Off-Highway Truck and 775F Off-Highway Truck Power Train Power Train Hydraulic System Troubleshooting
583T Pipelayer Engine Supplement Engine Side Guards - Remove and Install
2006/10/30 Improved Hoist Cylinders Are Used {5102}
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2113 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2113 - FMI 04
1390 Track Feller Buncher Hub Oil Level (Flexxaire Fan) - Check
773G and 775G Off-Highway Truck Power Train Relief Valve (Torque Converter Inlet) Pressure - Test