Finding Top Center Position for No. 1 Piston
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 9U-6198     | 曲轴转动工具     | 1     |
B     | 230-6283     | 曲轴定时销     | 1     |
C     | 230-6284     | 凸轮轴定时销     | 1     |
D     | 5P-7305     | 曲轴转动工具     | 1     |
E     | 9U-7336     | 曲轴转动工具     | 1     |
Show/hide table
图 1 | g01336252 |
(1) 凸轮轴销孔 (2) 曲轴销孔 |
- 卸下阀机构罩盖、电热塞和前壳体罩盖。 请参阅拆解和组装, "前盖 - 拆卸和安装"。
注: 曲轴皮带轮仍在发动机上的情况下可以插入曲轴定时销。
- 使用工具 (A) 以发动机的正常旋转方向转动曲轴,直到 4 号缸的进气阀刚打开,且其排气阀 4 号缸尚未完全关闭。
注: 如果发动机前端的入口受限,则使用替代工具 (D) 和工具 (E) 。
- 以发动机正常旋转方向小心地转动曲轴,使曲轴中的孔与缸体 (2) 及定时箱中的孔对齐。 将工具 (B) 完全插入曲柄臂的孔中。
- 将工具 (C) 插入凸轮轴齿轮 (1) 的孔中,该孔位于 1 号活塞上止点位置的时间。
注: 已安装销后,凸轮轴齿轮可以轻微转动。
- 从凸轮轴齿轮和曲柄臂上卸下定时销。
Caterpillar Information System:
770 and 772 Off-Highway Truck Daily Inspection
1390 Track Feller Buncher Hub Oil (Flexxaire Fan) - Change
1390 Track Feller Buncher Hub Oil (Flexxaire Fan) - Add
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125} Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
1090, 1190, 1190T and 1290T Track Feller Bunchers Hood Tilting
C11 and C15 Engines for Caterpillar Built Machines Electrical Connectors - Inspect
773F Off-Highway Truck and 775F Off-Highway Truck Power Train Rear Axle and Final Drive System
583T Pipelayer Engine Supplement Bottom Guard - Install
583T Pipelayer Engine Supplement Bottom Guard - Remove
1090, 1190, 1190T and 1290T Track Feller Bunchers Monitoring System - Information about System Operation
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Position Sensor (Rear Steering) - Remove and Install
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 0600 - FMI 04
773F Off-Highway Truck and 775F Off-Highway Truck Power Train Power Train Hydraulic System Troubleshooting
583T Pipelayer Engine Supplement Engine Side Guards - Remove and Install
2006/10/30 Improved Hoist Cylinders Are Used {5102}
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2113 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 2113 - FMI 04
1390 Track Feller Buncher Hub Oil Level (Flexxaire Fan) - Check
773G and 775G Off-Highway Truck Power Train Relief Valve (Torque Converter Inlet) Pressure - Test
325D Material Handler Circuit Breakers - Reset
773F Off-Highway Truck and 775F Off-Highway Truck Power Train Relief Valve (Torque Converter Outlet) Pressure - Test and Adjust
2006/05/08 A New Location for the Dipstick is Now Used on the Rotor Transmission on Reclaimer Mixers {3030}
Installing the 258-3639 Backhoe Mounting Gp (Kit) or the 367-9770 Backhoe Mounting Gp (Kit){6504} Installing the 258-3639 Backhoe Mounting Gp (Kit) or the 367-9770 Backhoe Mounting Gp (Kit){6504}
770 and 772 Off-Highway Trucks Automatic Lubrication System Lubrication System