New PC Service Tool Software Released for Cellular Based Product Link {7620}
- Agricultural Tractor:
- All
- Articulated Truck:
- All
- Asphalt Paver:
- All
- Backhoe Loader:
- All
- Challenger:
- All
- Cold Planer:
- All
- Combine:
- All
- Compact Wheel Loader:
- ALL
- Earthmoving Compactor:
- All
- Excavator:
- All
- Forest Products:
- All
- Integrated Toolcarrier:
- All
- Landfill Compactor:
- All
- Load Haul Dump:
- All
- Mini Hydraulic Excavator:
- All
- Motor Grader:
- All
- Multi Terrain Loader:
- All
- Off-Highway Truck/Tractor:
- All
- Paving Compactor:
- All
- Pipelayer:
- All
- Road Reclaimer/Soil Stabilizer:
- All
- Skid Steer Loader:
- All
- Soil Compactor:
- All
- Telehandler:
- All
- Track-Type Loader:
- All
- Track-Type Skidder:
- All
- Track-Type Tractor:
- All
- Wheel Dozer:
- All
- Wheel Feller Buncher:
- All
- Wheel Loader:
- All
- Wheel Skidder:
- All
- Wheel Tractor-Scraper:
- All
- All
Download the Software
A new version of PC Service Tool (EERE5001 ver. 1.0.2) can now be downloaded from the Caterpillar SISweb Internet site. To download the new version of PC Service Tool, perform the following steps:
- From the main SISweb page under the "Highlights" Section, click on "Downloads". From "Downloads", scroll down to "Additional Downloads".
Show/hide table
Illustration 1 | g01129738 |
- Select "PL102C Service Tool ".
Show/hide table
Illustration 2 | g01129742 |
Save the file to a folder. Record the folder location where the file was saved.
Uninstall the Old Software
If you have previously installed an earlier version of the Product Link PL102C Service Tool, you must first uninstall the older version. To uninstall the older software, perform the following steps:
- Click on "Start", "Settings", "Control Panel", and "Add/Remove Programs".
- Scroll down the "Add/Remove Programs" list until you locate the Caterpillar Service Tool. Click on "Remove". Answer Yes to the pop-up "Are you sure you want to remove?".
Show/hide table
Illustration 3 | g01129842 |
Show/hide table
Illustration 4 | g01131004 |
Install the New Software
Perform the following steps to install the new PL102C Service Tool Software:
- Locate the previously saved zip file. Extract the compressed files and double-click on "Setup.exe". An icon will be placed on your desktop as shown in Illustration 6.
Show/hide table
Illustration 5 | g01129848 |
- Connect the 249-6476 serial cable and start the PC Service Tool application.
Show/hide table
Illustration 6 | g01129880 |
- Verify/Set the Product Watch. For configuration information, refer to Systems Operations, RENR8115, "Product Link PL102C", "Configure PL102C Module Property Parameters".
Caterpillar Information System:
2004/12/13 Correction to Special Instruction, "Product Link PL102C System Installation" and Systems Operation, Testing and Adjust, "Product Link PL102C" {7602}
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System Gear Motor (Hydraulic Fan)
793D Off-Highway Truck Safety Messages
2004/12/06 Procedure for the Separation of the Wiring Harness {1451}
3508C, 3512C and 3516C Marine Engines Pistons and Connecting Rods - Install
3508C, 3512C and 3516C Marine Engines Pistons and Connecting Rods - Remove
TK741, TK751 and TK752 Track Feller Bunchers Engine Supplement Muffler - Remove and Install
TH580B Telehandler Machine Systems Quick Coupler - Install
Asphalt Pavers Burner Electronic Control System System Schematic
C7 Engines for Caterpillar Built Machines Water Pump - Assemble
C7 Engines for Caterpillar Built Machines Water Pump - Disassemble
TK741, TK751 and TK752 Track Feller Bunchers Engine Supplement Refrigerant Compressor - Remove and Install
2004/12/13 New VIMS Version 10.43 Class of Onboard Software {7601, 7620}
2004/12/13 Correction to Special Instruction, "Product Link PL102C System Installation" {7620}
2004/12/20 New Pressure Sensor Now Used for 797 and 797B {5574}
2004/12/20 New Engine Software Improves Sensor Reliability on Wheel Loaders {7620}
R2900G Load Haul Dump Radiator Core - Clean
R1300G Series II Load Haul Dump Fire Suppression System (Foam) - If Equipped
R1300G Series II Load Haul Dump Fire Suppression System (Dry Powder) - If Equipped
R1300G Series II Load Haul Dump Lift Arm Support Pins
R1300G Series II Load Haul Dump Walk-Around Inspection
735, 740 and 740 EJECTOR Articulated Trucks Power Train Transmission Hydraulic Control
AP-1055D and BG-2455D Asphalt Pavers Propel System Front Idler (Steel Track)
TH580B Telehandler Machine Systems Cab Heater - Install