Quick Coupler - Install
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 9U-5336 | Adapter | 1 |
| 9U-6832 | Nut | 1 | |
| 4C-9634 | Puller Stud | 1 | |
| 6V-3175 | Double Acting Cylinder | 1 | |
| 3S-6224 | Electric Hydraulic Pump Gp | 1 | |
| B | 1P-0520 | Driver Gp | 1 |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Use Tooling (A) in order to install bearings (8). Use Tooling (B) in order to install seals (7).
Show/hide table
Illustration 3 g01124756 - Attach a suitable lifting device to quick coupler (6) and position quick coupler (6). The weight of quick coupler (6) is approximately
141 kg (310 lb) . Install pin (5) and bolt (4).Show/hide table
Illustration 4 g01124755 - Install pin assembly (2). Install bolt (3).
Show/hide table
Illustration 5 g01124742 - Connect hose assemblies (1).
Show/hide table
| |
| Illustration 1 | g01124757 |
Show/hide table
| |
| Illustration 2 | g01124763 |
Caterpillar Information System:
Asphalt Pavers Burner Electronic Control System System Schematic
C7 Engines for Caterpillar Built Machines Water Pump - Assemble
C7 Engines for Caterpillar Built Machines Water Pump - Disassemble
TK741, TK751 and TK752 Track Feller Bunchers Engine Supplement Refrigerant Compressor - Remove and Install
TH580B Telehandler Machine Systems Quick Coupler - Remove
Asphalt Pavers Burner Electronic Control System CID 943 FMI F12
Asphalt Pavers Burner Electronic Control System CID 942 FMI F06
TH580B Telehandler Machine Systems Solenoid Valve (Frame Leveling) - Remove and Install
834H Wheel Dozer and 836H Landfill Compactor Steering System System Pressure - Release
Asphalt Pavers Burner Electronic Control System CID 942 FMI F05
TK741, TK751 and TK752 Track Feller Bunchers Engine Supplement Air Cleaner - Remove and Install
C27 and C32 Engines Fuel System Pressure - Test
TK741, TK751 and TK752 Track Feller Bunchers Engine Supplement Muffler - Remove and Install
3508C, 3512C and 3516C Marine Engines Pistons and Connecting Rods - Remove
3508C, 3512C and 3516C Marine Engines Pistons and Connecting Rods - Install
2004/12/06 Procedure for the Separation of the Wiring Harness {1451}
793D Off-Highway Truck Safety Messages
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System Gear Motor (Hydraulic Fan)
2004/12/13 Correction to Special Instruction, "Product Link PL102C System Installation" and Systems Operation, Testing and Adjust, "Product Link PL102C" {7602}
2004/12/20 New PC Service Tool Software Released for Cellular Based Product Link {7620}
2004/12/13 New VIMS Version 10.43 Class of Onboard Software {7601, 7620}
2004/12/13 Correction to Special Instruction, "Product Link PL102C System Installation" {7620}
2004/12/20 New Pressure Sensor Now Used for 797 and 797B {5574}
2004/12/20 New Engine Software Improves Sensor Reliability on Wheel Loaders {7620}