| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| ZZ | 6V-9829 | Cap As | 2 |
| 6V-9508 | Plug | 2 | |
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
- Disconnect hose assemblies (1).
Show/hide table
Illustration 2 g01124755 - Remove bolt (3) and pin assembly (2).
Show/hide table
Illustration 3 g01124756 - Attach a suitable lifting device to quick coupler (6). The weight of quick coupler (6) is approximately
141 kg (310 lb) . Remove bolt (4) and pin (5). Remove quick coupler (6).Show/hide table
Illustration 4 g01124757 - Remove seals (7) and bearings (8).
| |
| Illustration 1 | g01124742 |
