TK741, TK751 and TK752 Track Feller Bunchers Engine Supplement Caterpillar

Removal Procedure

Show/hide table

Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.

Show/hide table



Illustration 1	g01124819

1. Remove guards (1) and (2) from the turbocharger and the muffler.

Show/hide table



Illustration 2	g01124820

2. Attach a suitable lifting device to the muffler. Disconnect clamp (5) .

3. Remove mounting bolts (3). The mounting bolts are located on the rear of muffler (4) .

4. Remove muffler (4). The weight of muffler (4) is approximately 25 kg (55 lb).

Installation Procedure

Show/hide table



Illustration 3	g01124820

1. Attach a suitable lifting device to muffler (4). Install muffler (4) into position. The weight of muffler (4) is approximately 25 kg (55 lb).

2. Apply Tooling (A) to mounting bolts (3). Install mounting bolts (3). The mounting bolts are located on the rear of muffler (4) .

3. Apply Tooling (A) to clamp (5). Connect clamp (5) .

Show/hide table



Illustration 4	g01124819

4. Apply Tooling (A) to the bolts. Install guards (1) and (2) onto the turbocharger and the muffler.