C7 Engines for Caterpillar Built Machines Caterpillar


Water Pump - Assemble

Usage:

584HD 109

组装步骤

表 1
所需工具    
工具     零件号     零件说明     数量    
A     1P-0510     冲头总成     1    
B     5P-9722     油封起子     1    


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。





    图 1g01124833

  1. 使用工具 (A) 和适当的压具将皮带轮 (9) 安装在轴组件 (8) 上。

  1. 使用工具 (B) 和适当的压具将油封组件 (6) 安装在壳体 (7) 中。

  1. 使用工具 (A) 和适当的压具将轴组件 (8) 安装在壳体 (7) 中。 安装轴组件,使轴承与壳体平齐。

  1. 使用工具 (A) 和适当的压具将叶轮 (5) 安装在轴组件 (8) 上。 安装叶轮,直到叶轮与水泵机加工表面之间的距离为 0.75 ± 0.25 mm (0.030 ± 0.010 in)。

  1. 安装新密封垫 (4) 。

  1. 安置盖 (3) 并安装螺栓 (2) 。 安装新 O 形密封圈 (1) 。

End By: 安装水泵。 请参阅 拆解和组装, "水泵 - 安装"。

Caterpillar Information System:

C7 Engines for Caterpillar Built Machines Water Pump - Disassemble
TK741, TK751 and TK752 Track Feller Bunchers Engine Supplement Refrigerant Compressor - Remove and Install
TH580B Telehandler Machine Systems Quick Coupler - Remove
Asphalt Pavers Burner Electronic Control System CID 943 FMI F12
Asphalt Pavers Burner Electronic Control System CID 942 FMI F06
TH580B Telehandler Machine Systems Solenoid Valve (Frame Leveling) - Remove and Install
834H Wheel Dozer and 836H Landfill Compactor Steering System System Pressure - Release
Asphalt Pavers Burner Electronic Control System CID 942 FMI F05
TK741, TK751 and TK752 Track Feller Bunchers Engine Supplement Air Cleaner - Remove and Install
C27 and C32 Engines Fuel System Pressure - Test
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System Oil Cooler (Brake, Hydraulic Fan)
Asphalt Pavers Burner Electronic Control System CID 942 FMI F03
Asphalt Pavers Burner Electronic Control System System Schematic
TH580B Telehandler Machine Systems Quick Coupler - Install
TK741, TK751 and TK752 Track Feller Bunchers Engine Supplement Muffler - Remove and Install
3508C, 3512C and 3516C Marine Engines Pistons and Connecting Rods - Remove
3508C, 3512C and 3516C Marine Engines Pistons and Connecting Rods - Install
2004/12/06 Procedure for the Separation of the Wiring Harness {1451}
793D Off-Highway Truck Safety Messages
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System Gear Motor (Hydraulic Fan)
2004/12/13 Correction to Special Instruction, "Product Link PL102C System Installation" and Systems Operation, Testing and Adjust, "Product Link PL102C" {7602}
2004/12/20 New PC Service Tool Software Released for Cellular Based Product Link {7620}
2004/12/13 New VIMS Version 10.43 Class of Onboard Software {7601, 7620}
2004/12/13 Correction to Special Instruction, "Product Link PL102C System Installation" {7620}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.