Correction to Special Instruction, "Product Link PL102C System Installation" and Systems Operation, Testing and Adjust, "Product Link PL102C" {7602}
- Agricultural Tractor:
- All
- Articulated Truck:
- All
- Asphalt Paver:
- All
- Backhoe Loader:
- All
- Challenger:
- All
- Cold Planer:
- All
- Combine:
- All
- Compact Wheel Loader:
- ALL
- Earthmoving Compactor:
- All
- Excavator:
- All
- Forest Products:
- All
- Integrated Toolcarrier:
- All
- Landfill Compactor:
- All
- Mini Hydraulic Excavator:
- All
- Motor Grader:
- All
- Multi Terrain Loader:
- All
- Off-Highway Truck/Tractor:
- All
- Pipelayer:
- All
- Road Reclaimer/Soil Stabilizer:
- All
- Skid Steer Loader:
- All
- Soil Compactor:
- All
- Telehandler:
- All
- Track-Type Loader:
- All
- Track-Type Skidder:
- All
- Track-Type Tractor:
- All
- Wheel Dozer:
- All
- Wheel Loader:
- All
- Wheel Skidder:
- All
- Wheel Tractor-Scraper:
- All
- All
The illustration shown in Special Instruction, REHS2143, "Product Link PL102C System Installation" (Illustration 4) and Systems Operation, Testing and Adjust, RENR8115, "Product Link PL102C" (Illustration 13) incorrectly depicts the pin locations for the PL102C Module. Pin 1 on both of the Molex connectors on the PL102C Module should be depicted as being closer to the Cellular Antenna, not the GPS Antenna.
Incorrect Wiring Diagram as Shown in REHS2143 and RENR8115
Show/hide table
Illustration 1 | g01129268 |
Incorrect pin locations on the PL102C Module. |
Correct Wiring Diagram that Should Replace the Incorrect Wiring Diagrams in REHS2143 and RENR8115
Show/hide table
Illustration 2 | g01129276 |
Correct pin locations on the PL102C Module. |
Caterpillar Information System:
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System Gear Motor (Hydraulic Fan)
793D Off-Highway Truck Safety Messages
2004/12/06 Procedure for the Separation of the Wiring Harness {1451}
3508C, 3512C and 3516C Marine Engines Pistons and Connecting Rods - Install
3508C, 3512C and 3516C Marine Engines Pistons and Connecting Rods - Remove
TK741, TK751 and TK752 Track Feller Bunchers Engine Supplement Muffler - Remove and Install
TH580B Telehandler Machine Systems Quick Coupler - Install
Asphalt Pavers Burner Electronic Control System System Schematic
C7 Engines for Caterpillar Built Machines Water Pump - Assemble
C7 Engines for Caterpillar Built Machines Water Pump - Disassemble
TK741, TK751 and TK752 Track Feller Bunchers Engine Supplement Refrigerant Compressor - Remove and Install
TH580B Telehandler Machine Systems Quick Coupler - Remove
2004/12/20 New PC Service Tool Software Released for Cellular Based Product Link {7620}
2004/12/13 New VIMS Version 10.43 Class of Onboard Software {7601, 7620}
2004/12/13 Correction to Special Instruction, "Product Link PL102C System Installation" {7620}
2004/12/20 New Pressure Sensor Now Used for 797 and 797B {5574}
2004/12/20 New Engine Software Improves Sensor Reliability on Wheel Loaders {7620}
R2900G Load Haul Dump Radiator Core - Clean
R1300G Series II Load Haul Dump Fire Suppression System (Foam) - If Equipped
R1300G Series II Load Haul Dump Fire Suppression System (Dry Powder) - If Equipped
R1300G Series II Load Haul Dump Lift Arm Support Pins
R1300G Series II Load Haul Dump Walk-Around Inspection
735, 740 and 740 EJECTOR Articulated Trucks Power Train Transmission Hydraulic Control
AP-1055D and BG-2455D Asphalt Pavers Propel System Front Idler (Steel Track)