Lift Arm Support Pins
Show/hide table
提升臂降下时,此处不得站人。 可能因挤压而发生严重的伤亡。 在这一区域维修机器前,装上提升臂支承销。 机器恢复工作前,卸下提升臂支承销并固定。 |
Show/hide table
注意 |
---|
在操作机器前,确保卸下提升臂支承销并将其放在存放位置。 如果机器在提升臂支承销装在提升臂内作业,可能导致前车架和提升臂损坏。 |
提升臂支承销位于提升臂两侧。 在机器铲斗控制总成区进行维修作业前,装上提升臂支承销。
- 把机器笔直地停放在水平地面上。
- 接合停车制动器。
- 升起提升臂 (1) ,直到提升臂支撑销孔与前机架塔对准。
Show/hide table
图 1 | g01132079 |
- 从存放位置卸下提升臂支撑销 (2) 。 如图所示,将每个提升臂支撑销 (2) 插入机器两侧的提升臂孔内。
- 降下提升臂,直到提升臂支承销 (2) 接触前机架塔。
- 将铲斗移到完全倾卸位置。
注: 下列为卸下提升臂支承销的步骤。
- 升起提升臂 (1) ,直到提升臂支撑销 (2) 高于前机架塔的两侧。
- 从机器两侧的提升臂上卸下提升臂支撑销 (2) 。 如图所示,将提升臂支撑销 (2) 安装在存放位置孔内。 存放销的孔位于前机架两侧。
Show/hide table
图 2 | g01132080 |
- 将铲斗降至地面。
Caterpillar Information System:
R1300G Series II Load Haul Dump Fire Suppression System (Dry Powder) - If Equipped
R1300G Series II Load Haul Dump Fire Suppression System (Foam) - If Equipped
R2900G Load Haul Dump Radiator Core - Clean
2004/12/20 New Engine Software Improves Sensor Reliability on Wheel Loaders {7620}
2004/12/20 New Pressure Sensor Now Used for 797 and 797B {5574}
2004/12/13 Correction to Special Instruction, "Product Link PL102C System Installation" {7620}
2004/12/13 New VIMS Version 10.43 Class of Onboard Software {7601, 7620}
2004/12/20 New PC Service Tool Software Released for Cellular Based Product Link {7620}
2004/12/13 Correction to Special Instruction, "Product Link PL102C System Installation" and Systems Operation, Testing and Adjust, "Product Link PL102C" {7602}
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System Gear Motor (Hydraulic Fan)
793D Off-Highway Truck Safety Messages
2004/12/06 Procedure for the Separation of the Wiring Harness {1451}
R1300G Series II Load Haul Dump Walk-Around Inspection
735, 740 and 740 EJECTOR Articulated Trucks Power Train Transmission Hydraulic Control
AP-1055D and BG-2455D Asphalt Pavers Propel System Front Idler (Steel Track)
TH580B Telehandler Machine Systems Cab Heater - Install
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Eccentric Weight Housing - Install
PS-360C Pneumatic Compactor Propel System Parking Brake
Installing the 218-6738 High Flow Conversion Kit {5057, 5059, 5073, 5264, 5705} Installing the 218-6738 High Flow Conversion Kit {5057, 5059, 5073, 5264, 5705}
834H Wheel Dozer and 836H Landfill Compactor Steering System Pump Performance (Steering) - Test
3500 Engines Connecting Rod Bearings - Remove and Install
TH210 and TH215 Telehandlers Hydraulic System Joystick Control
2004/11/29 A New Bolt is Used for the Aftercooler Cover {1063}
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Gear Pump (Pilot) - Disassemble